Schneider Electric SH31004P11F2100 servo motor SH3 100 10Nm,key,single,brake,90°conn.IP65/IP65,6k RPM
SKU:
SH31004P11F2100
UPC:
MPN:
SH31004P11F2100
Condition:
New
Peak Stall Torque:
40.5 N.m 115...480 V three phase
Pvc Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Stator Inductance:
18.35 mH
Width:
8 mm
Motor Flange Size:
100 mm
Mounting Holes Diameter:
9.0 mm
[Us] Rated Supply Voltage:
115...480 V
Device Short Name:
SH3.....P
Maximum Radial Force Fr:
1070 N 1000 rpm || 850 N 2000 rpm || 740 N 3000 rpm
Net Weight:
9.9 kg
Number Of Motor Poles:
4
Key Width:
8 mm
Shaft End:
parallel key
Holding Torque:
12 N.m
Rohs Exemption Information:
Yes
Stator Resistance:
1.81 Ohm
Product Or Component Type:
servo motor
Torque Constant:
1.62 N.m/A 120°C
China Rohs Regulation:
X
Continuous Power:
2500 W
Type Of Cooling:
natural convection
Centring Collar Depth:
3.5 mm
Electrical Connection:
straight connector
Speed Feedback Resolution:
128 periods
Range Compatibility:
PacDrive 3
Mercury Free:
Yes
Shaft Diameter:
24 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
international standard flange
Phase:
three phase
Number Of Mounting Holes:
4
Centring Collar Diameter:
95 mm
Nominal Torque:
9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
Continuous Stall Torque:
10 N.m 115...480 V three phase
Warranty:
18 months
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weight:
9.9 kg
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Back Emf Constant:
103 V/krpm 20°C
Circle Diameter Of The Mounting Holes:
115 mm
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Maximum Mechanical Speed:
6000 rpm
Holding Brake:
with
Continuous Stall Current:
6.2 A
Sustainable Offer Status:
Green Premium product
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
