Schneider Electric SH31004P12A2000 servo motor SH3 100 10Nm,key,multi,nobrake,90°conn.IP54/IP65,6k RPM
SKU:
SH31004P12A2000
UPC:
MPN:
SH31004P12A2000
Condition:
New
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Product Or Component Type:
servo motor
Environmental Disclosure:
ENVPEP111049EN
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Maximum Mechanical Speed:
6000 rpm
Centring Collar Depth:
3.5 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
9.2 kg
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
115...480 V
Maximum Axial Force Fa:
160 N
Back Emf Constant:
103 V/krpm 20°C
Number Of Mounting Holes:
4
Mounting Support:
international standard flange
Circularity Profile:
N/A
Nominal Output Power:
780 W 115 V single phase || 1490 W 230 V single phase || 2480 W 400 V three phase || 2600 W 480 V three phase
Device Short Name:
SH3.....P
Encoder Type:
absolute multiturn SinCos Hiperface
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Brake:
without
Circle Diameter Of The Mounting Holes:
115 mm
Stator Resistance:
1.81 Ohm
Shaft Length:
50 mm
Continuous Stall Current:
6.2 A
Centring Collar Diameter:
95 mm
Continuous Power:
2500 W
Torque Constant:
1.62 N.m/A 120°C
Rohs Exemption Information:
Yes
Country of Origin:
United States
Shaft Diameter:
24 mm
Weight:
9.2 kg
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
China Rohs Regulation:
X
Peak Stall Torque:
40.5 N.m 115...480 V three phase
Motor Flange Size:
100 mm
Continuous Stall Torque:
10 N.m 115...480 V three phase
Number Of Motor Poles:
4
Key Width:
8 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and parallel key shaft end...
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and parallel key shaft end...
