Schneider Electric SH31004P12F2100 servo motor SH3 100 10Nm,key,multi,brake,90°conn.IP65/IP65,6k RPM
SKU:
SH31004P12F2100
UPC:
MPN:
SH31004P12F2100
Condition:
New
Product Or Component Type:
servo motor
Phase:
three phase
Stator Inductance:
18.35 mH
Nominal Torque:
9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
Motor Flange Size:
100 mm
Shaft Diameter:
24 mm
Holding Torque:
12 N.m
Speed Feedback Resolution:
128 periods
Back Emf Constant:
103 V/krpm 20°C
Peak Stall Torque:
40.5 N.m 115...480 V three phase
Shaft End:
parallel key
Continuous Stall Torque:
10 N.m 115...480 V three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Torque Constant:
1.62 N.m/A 120°C
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electrical Connection:
straight connector
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Range Compatibility:
PacDrive 3
Device Short Name:
SH3.....P
[Us] Rated Supply Voltage:
115...480 V
Nominal Output Power:
780 W 115 V single phase || 1490 W 230 V single phase || 2480 W 400 V three phase || 2600 W 480 V three phase
Mounting Holes Diameter:
9.0 mm
Mercury Free:
Yes
Maximum Mechanical Speed:
6000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mounting Support:
international standard flange
Number Of Motor Poles:
4
Country of Origin:
United States
Maximum Current Irms:
32.3 A
Rohs Exemption Information:
Yes
Rotor Inertia:
5.245 kg.cm²
Continuous Stall Current:
6.2 A
Holding Brake:
with
Key Width:
8 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Circle Diameter Of The Mounting Holes:
115 mm
Number Of Mounting Holes:
4
Length:
307.5 mm
Stator Resistance:
1.81 Ohm
Maximum Axial Force Fa:
160 N
Circularity Profile:
N/A
Centring Collar Depth:
3.5 mm
Continuous Power:
2500 W
Weight:
9.9 kg
Width:
8 mm
Maximum Radial Force Fr:
1070 N 1000 rpm || 850 N 2000 rpm || 740 N 3000 rpm
