Schneider Electric SH31401P02A2000 servo motor SH3 140 11,1Nm,nokey,multi,nobrake,90°conn.IP54/IP65,4k RPM
SKU:
SH31401P02A2000
UPC:
MPN:
SH31401P02A2000
Condition:
New
Type Of Cooling:
natural convection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft End:
smooth shaft
Device Short Name:
SH3.....P
Phase:
three phase
Circle Diameter Of The Mounting Holes:
165 mm
Country of Origin:
United States
Environmental Disclosure:
ENVPEP111049EN
Maximum Current Irms:
20.8 A
Centring Collar Diameter:
130 mm
Mercury Free:
Yes
Motor Flange Size:
140 mm
Net Weight:
11.9 kg
Warranty:
18 months
Maximum Axial Force Fa:
300 N
Encoder Type:
absolute multiturn SinCos Hiperface
Stator Resistance:
1.41 Ohm
Pvc Free:
Yes
Holding Brake:
without
Range Compatibility:
PacDrive 3
Speed Feedback Resolution:
128 periods
Continuous Power:
2900 W
Torque Constant:
1.43 N.m/A 120°C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
10.95 N.m 115 V single phase || 10.6 N.m 230 V single phase || 9.2 N.m 400 V three phase || 8.4 N.m 480 V three phase
Shaft Diameter:
24 mm
Weight:
11.9 kg
Back Emf Constant:
100 V/krpm 20°C
Continuous Stall Torque:
11.1 N.m 115...480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Mechanical Speed:
4000 rpm
Stator Inductance:
23.72 mH
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Product Or Component Type:
servo motor
Shaft Length:
50 mm
Centring Collar Depth:
3.5 mm
[Us] Rated Supply Voltage:
115...480 V
Nominal Output Power:
860 W 115 V single phase || 1670 W 230 V single phase || 2890 W 400 V three phase || 3170 W 480 V three phase
Mounting Holes Diameter:
11 mm
China Rohs Regulation:
X
Mounting Support:
international standard flange
Number Of Mounting Holes:
4
Continuous Stall Current:
7.8 A
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 5-pole servo motor features maximum mechanical speed of 4000RPM and smooth shaft end without...
