Schneider Electric SH31403P01F1200 servo motor SH3 140 27,8Nm,nokey,single,brake,str.conn,IP65/IP67,4k RPM
SKU:
SH31403P01F1200
UPC:
MPN:
SH31403P01F1200
Condition:
New
Range Compatibility:
PacDrive 3
Device Short Name:
SH3.....P
Continuous Stall Current:
17.6 A
Speed Feedback Resolution:
128 periods
Number Of Motor Poles:
5
Rotor Inertia:
23.44 kg.cm²
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Peak Stall Torque:
90.2 N.m 115...480 V three phase
Continuous Stall Torque:
27.8 N.m 115...480 V three phase
Product Or Component Type:
servo motor
Warranty:
18 months
Centring Collar Depth:
3.5 mm
Maximum Current Irms:
61 A
Rohs Exemption Information:
Yes
Continuous Power:
4100 W
Holding Brake:
with
Motor Flange Size:
140 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Type Of Cooling:
natural convection
Maximum Axial Force Fa:
300 N
Sustainable Offer Status:
Green Premium product
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
Weight:
23.1 kg
Country of Origin:
United States
Encoder Type:
absolute single turn SinCos Hiperface
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Holes Diameter:
11 mm
Stator Inductance:
7.72 mH
Holding Torque:
36 N.m
Shaft End:
smooth shaft
Nominal Torque:
24.7 N.m 115 V single phase || 21.2 N.m 230 V single phase || 12.9 N.m 400 V three phase || 9.1 N.m 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
international standard flange
[Us] Rated Supply Voltage:
115...480 V
Stator Resistance:
0.4 Ohm
Shaft Diameter:
24 mm
Centring Collar Diameter:
130 mm
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Torque Constant:
1.58 N.m/A 120°C
Circle Diameter Of The Mounting Holes:
165 mm
Net Weight:
23.1 kg
Number Of Mounting Holes:
4
China Rohs Regulation:
X
Shaft Length:
50 mm
Phase:
three phase
Length:
365.5 mm
Maximum Radial Force Fr:
2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm