Schneider Electric

Schneider Electric SH31403P11F2000 servo motor SH3 140 27,8Nm,key,single,brake,90°conn.IP54/IP65,4k RPM

SKU:

SH31403P11F2000

UPC:

MPN:

SH31403P11F2000

Condition:

New

Stator Resistance:

0.4 Ohm

Torque Constant:

1.58 N.m/A 120°C

Rotor Inertia:

23.44 kg.cm²

Back Emf Constant:

105 V/krpm 20°C

Phase:

three phase

Mercury Free:

Yes

Country of Origin:

United States

Nominal Output Power:

1940 W 115 V single phase || 3330 W 230 V single phase || 4050 W 400 V three phase || 3430 W 480 V three phase

Number Of Mounting Holes:

4

Environmental Disclosure:

ENVPEP111049EN

Encoder Type:

absolute single turn SinCos Hiperface

Number Of Motor Poles:

5

Weight:

23.1 kg

[Us] Rated Supply Voltage:

115...480 V

Nominal Speed:

750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase

Shaft Length:

50 mm

Peak Stall Torque:

90.2 N.m 115...480 V three phase

Nominal Torque:

24.7 N.m 115 V single phase || 21.2 N.m 230 V single phase || 12.9 N.m 400 V three phase || 9.1 N.m 480 V three phase

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Net Weight:

23.1 kg

Circularity Profile:

N/A

Type Of Cooling:

natural convection

Electrical Connection:

rotatable right angled connector

Device Short Name:

SH3.....P

Continuous Stall Current:

17.6 A

Continuous Stall Torque:

27.8 N.m 115...480 V three phase

Rohs Exemption Information:

Yes

Maximum Axial Force Fa:

300 N

Stator Inductance:

7.72 mH

Maximum Radial Force Fr:

2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm

Continuous Power:

4100 W

Shaft End:

parallel key

Speed Feedback Resolution:

128 periods

Centring Collar Diameter:

130 mm

Mounting Support:

international standard flange

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Maximum Current Irms:

61 A

Range Compatibility:

PacDrive 3

Warranty:

18 months

Maximum Mechanical Speed:

4000 rpm

Key Width:

8 mm

Ip Degree Of Protection:

IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5

Holding Brake:

with

Motor Flange Size:

140 mm

Shaft Diameter:

24 mm

Product Or Component Type:

servo motor

Pvc Free:

Yes

Width:

8 mm