Schneider Electric SH31403P12A1200 servo motor SH3 140 27,8Nm,key,multi,nobrake,str.conn,IP65/IP67,4k RPM
SKU:
SH31403P12A1200
UPC:
MPN:
SH31403P12A1200
Condition:
New
Continuous Power:
4100 W
[Us] Rated Supply Voltage:
115...480 V
Continuous Stall Current:
17.6 A
Weight:
21.3 kg
Key Width:
8 mm
Country of Origin:
United States
Torque Constant:
1.58 N.m/A 120°C
Maximum Radial Force Fr:
2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm
Warranty:
18 months
Number Of Motor Poles:
5
Range Compatibility:
PacDrive 3
Centring Collar Depth:
3.5 mm
Mounting Support:
international standard flange
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Back Emf Constant:
105 V/krpm 20°C
Number Of Mounting Holes:
4
Electrical Connection:
straight connector
Holding Brake:
without
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Width:
8 mm
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Pvc Free:
Yes
Encoder Type:
absolute multiturn SinCos Hiperface
Stator Resistance:
0.4 Ohm
Shaft End:
parallel key
Stator Inductance:
7.72 mH
Maximum Mechanical Speed:
4000 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
61 A
Maximum Axial Force Fa:
300 N
China Rohs Regulation:
X
Device Short Name:
SH3.....P
Speed Feedback Resolution:
128 periods
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Shaft Length:
50 mm
Nominal Output Power:
1940 W 115 V single phase || 3330 W 230 V single phase || 4050 W 400 V three phase || 3430 W 480 V three phase
Rotor Inertia:
17.94 kg.cm²
Motor Flange Size:
140 mm
Product Or Component Type:
servo motor
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Circularity Profile:
N/A
Nominal Torque:
24.7 N.m 115 V single phase || 21.2 N.m 230 V single phase || 12.9 N.m 400 V three phase || 9.1 N.m 480 V three phase
