Schneider Electric SH31404P02A1200 servo motor SH3 140 33,4Nm,nokey,multi,nobrake,str.conn,IP65/IP67,4k RPM
SKU:
SH31404P02A1200
UPC:
MPN:
SH31404P02A1200
Condition:
New
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Pvc Free:
Yes
Centring Collar Diameter:
130 mm
Maximum Mechanical Speed:
4000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Mounting Holes:
4
Encoder Type:
absolute multiturn SinCos Hiperface
Stator Inductance:
5.945 mH
[Us] Rated Supply Voltage:
115...480 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Number Of Motor Poles:
5
Warranty:
18 months
China Rohs Regulation:
X
Shaft End:
smooth shaft
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electrical Connection:
straight connector
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Speed Feedback Resolution:
128 periods
Phase:
three phase
Range Compatibility:
PacDrive 3
Shaft Length:
50 mm
Maximum Current Irms:
95.6 A
Weight:
26 kg
Back Emf Constant:
104 V/krpm 20°C
Motor Flange Size:
140 mm
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
300 N
Centring Collar Depth:
3.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circle Diameter Of The Mounting Holes:
165 mm
Product Or Component Type:
servo motor
Stator Resistance:
0.28 Ohm
Device Short Name:
SH3.....P
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Mounting Support:
international standard flange
Shaft Diameter:
24 mm
Mounting Holes Diameter:
11 mm
Net Weight:
26 kg
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
