Schneider Electric SH31404P02F1200 servo motor SH3 140 33,4Nm,nokey,multi,brake,str.conn,IP65/IP67,4k RPM
SKU:
SH31404P02F1200
UPC:
MPN:
SH31404P02F1200
Condition:
New
Device Short Name:
SH3.....P
Encoder Type:
absolute multiturn SinCos Hiperface
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5
Phase:
three phase
Shaft Diameter:
24 mm
Holding Brake:
with
Back Emf Constant:
104 V/krpm 20°C
Product Or Component Type:
servo motor
Torque Constant:
1.57 N.m/A 120°C
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pvc Free:
Yes
Circularity Profile:
N/A
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Warranty:
18 months
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Environmental Disclosure:
ENVPEP111049EN
[Us] Rated Supply Voltage:
115...480 V
Electrical Connection:
straight connector
Sustainable Offer Status:
Green Premium product
Number Of Mounting Holes:
4
Number Of Motor Poles:
5
Net Weight:
27.8 kg
Mercury Free:
Yes
Weight:
27.8 kg
Mounting Support:
international standard flange
Continuous Power:
4040 W
Shaft Length:
50 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Stator Inductance:
5.945 mH
Shaft End:
smooth shaft
Holding Torque:
36 N.m
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Maximum Axial Force Fa:
300 N
Range Compatibility:
PacDrive 3
Maximum Current Irms:
95.6 A
Peak Stall Torque:
131.9 N.m 115...480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold