Schneider Electric SH31404P12A1000 Sh3 Motor 140.4 Key Mlt Str Ip54
SKU:
SH31404P12A1000
UPC:
3606481973160
MPN:
Condition:
New
Number Of Mounting Holes:
4
Back Emf Constant:
104 V/krpm 20 °C
Product Or Component Type:
servo motor
Centring Collar Diameter:
130 mm
Speed Feedback Resolution:
128 periods
Rotor Inertia:
23.7 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Range Compatibility:
PacDrive 3
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Mounting Support:
international standard flange
Rohs Exemption Information:
Yes
Maximum Mechanical Speed:
4000 rpm
Net Weight:
26 kg
Device Short Name:
SH3.....P
Torque Constant:
1.57 N.m/A 120 °C
Sustainable Offer Status:
Green Premium product
Circle Diameter Of The Mounting Holes:
165 mm
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
Length:
382.5 mm
Pvc Free:
Yes
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Mercury Free:
Yes
Stator Resistance:
0.28 Ohm
Motor Flange Size:
140 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
three phase
Shaft End:
parallel key
Stator Inductance:
5.945 mH
Number Of Motor Poles:
5
Environmental Disclosure:
ENVPEP111049EN
Electrical Connection:
straight connector
Continuous Stall Current:
21.3 A
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Peak Stall Torque:
131.9 N.m 115...480 V three phase
Type Of Cooling:
natural convection
Circularity Profile:
N/A
Continuous Power:
4040 W
Maximum Current Irms:
95.6 A
Maximum Axial Force Fa:
300 N
[Us] Rated Supply Voltage:
115...480 V
Shaft Length:
50 mm
Mounting Holes Diameter:
11 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Shaft Diameter:
24 mm
Warranty:
18 months
Key Width:
8 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
