Schneider Electric SH31404P12A2000 Sh3 Motor 140.4 Key Mlt Ang Ip54
SKU:
SH31404P12A2000
UPC:
3606485298276
MPN:
Condition:
New
Availability:
Schneider orders under $1250 will incur a $60 processing fee at checkout
Centring Collar Diameter:
130 mm
Shaft End:
parallel key
Shaft Length:
50 mm
Peak Stall Torque:
131.9 N.m 115...480 V three phase
Length:
382.5 mm
Number Of Mounting Holes:
4
Product Or Component Type:
servo motor
Motor Flange Size:
140 mm
Phase:
three phase
Centring Collar Depth:
3.5 mm
Circle Diameter Of The Mounting Holes:
165 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Circularity Profile:
N/A
Pvc Free:
Yes
Shaft Diameter:
24 mm
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Net Weight:
26 kg
Maximum Mechanical Speed:
4000 rpm
Mounting Holes Diameter:
11 mm
Environmental Disclosure:
ENVPEP111049EN
Holding Brake:
without
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Inductance:
5.945 mH
Torque Constant:
1.57 N.m/A 120 °C
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Key Width:
8 mm
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Warranty:
18 months
Rotor Inertia:
23.7 kg.cm²
Mercury Free:
Yes
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
[Us] Rated Supply Voltage:
115...480 V
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Stator Resistance:
0.28 Ohm
Continuous Power:
4040 W
Mounting Support:
international standard flange
Back Emf Constant:
104 V/krpm 20 °C
Type Of Cooling:
natural convection
Number Of Motor Poles:
5
Maximum Axial Force Fa:
300 N
Speed Feedback Resolution:
128 periods
Maximum Current Irms:
95.6 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electrical Connection:
rotatable right angled connector
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
