Schneider Electric SH32051P12F2000 servo motor SH3 205 36,9Nm,key,multi,brake,90°conn.IP54/IP65,3.8k RPM
SKU:
SH32051P12F2000
UPC:
MPN:
SH32051P12F2000
Condition:
New
Phase:
three phase
Electrical Connection:
straight connector
Motor Flange Size:
205 mm
Key Width:
10 mm
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Circularity Profile:
N/A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Torque Constant:
1.6 N.m/A 120°C
Number Of Motor Poles:
5
Nominal Torque:
31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase
Back Emf Constant:
104 V/krpm 20°C
Stator Inductance:
8.7 mH
Maximum Axial Force Fa:
740 N
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
Stator Resistance:
0.3 Ohm
Mercury Free:
Yes
Warranty:
18 months
Shaft Diameter:
38 mm
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
87.2 A
Mounting Holes Diameter:
14 mm
Peak Stall Torque:
110 N.m 115...480 V three phase
Centring Collar Depth:
4 mm
Environmental Disclosure:
ENVPEP111049EN
Weight:
38.6 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
X
Shaft Length:
80 mm
Holding Torque:
80 N.m
Pvc Free:
Yes
Circle Diameter Of The Mounting Holes:
215 mm
[Us] Rated Supply Voltage:
115...480 V
Nominal Output Power:
2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase
Maximum Mechanical Speed:
3800 rpm
Continuous Stall Current:
21 A
Product Or Component Type:
servo motor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft End:
parallel key
Device Short Name:
SH3.....P
Centring Collar Diameter:
180 mm
Maximum Radial Force Fr:
3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 5-pole servo motor features maximum mechanical speed of 3800RPM and parallel key shaft end...
