Schneider Electric SH32052P02A2000 servo motor SH3 205 64,9Nm,nokey,multi,nobrake,90°conn.IP54/IP65,3.8k RPM
SKU:
SH32052P02A2000
UPC:
MPN:
SH32052P02A2000
Condition:
New
Torque Constant:
2.58 N.m/A 120°C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Motor Flange Size:
205 mm
Maximum Radial Force Fr:
4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
Maximum Current Irms:
96.8 A
Shaft Diameter:
38 mm
Shaft End:
smooth shaft
Environmental Disclosure:
ENVPEP111049EN
Encoder Type:
absolute multiturn SinCos Hiperface
Type Of Cooling:
natural convection
Holding Brake:
without
Continuous Stall Current:
25.7 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Inductance:
8.2 mH
Range Compatibility:
PacDrive 3
Peak Stall Torque:
220 N.m 115...480 V three phase
China Rohs Regulation:
X
Mounting Holes Diameter:
14 mm
Pvc Free:
Yes
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Electrical Connection:
straight connector
Product Or Component Type:
servo motor
Number Of Motor Poles:
5
Back Emf Constant:
161 V/krpm 20°C
Centring Collar Depth:
4 mm
Nominal Output Power:
3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
Centring Collar Diameter:
180 mm
Weight:
50 kg
Maximum Mechanical Speed:
3800 rpm
Maximum Axial Force Fa:
740 N
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 || IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5
