Schneider Electric SH32052P02F2200 servo motor SH3 205 64,9Nm,nokey,multi,brake,90°conn.IP65/IP67,3.8k RPM
SKU:
SH32052P02F2200
UPC:
MPN:
SH32052P02F2200
Condition:
New
Continuous Stall Torque:
64.9 N.m 115...480 V three phase
Maximum Radial Force Fr:
4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Torque Constant:
2.58 N.m/A 120°C
Peak Stall Torque:
220 N.m 115...480 V three phase
Back Emf Constant:
161 V/krpm 20°C
Pvc Free:
Yes
Nominal Torque:
61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
Holding Brake:
with
Stator Inductance:
8.2 mH
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Power:
7900 W
Sustainable Offer Status:
Green Premium product
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Mounting Holes Diameter:
14 mm
Speed Feedback Resolution:
128 periods
Stator Resistance:
0.3 Ohm
Country of Origin:
United States
Product Or Component Type:
servo motor
Nominal Output Power:
3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
Circle Diameter Of The Mounting Holes:
215 mm
Electrical Connection:
rotatable right angled connector
Maximum Current Irms:
96.8 A
Net Weight:
53.6 kg
Encoder Type:
absolute multiturn SinCos Hiperface
China Rohs Regulation:
X
Mounting Support:
international standard flange
Number Of Motor Poles:
5
Holding Torque:
80 N.m
Environmental Disclosure:
ENVPEP111049EN
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Motor Flange Size:
205 mm
Range Compatibility:
PacDrive 3
Maximum Mechanical Speed:
3800 rpm
Rotor Inertia:
145 kg.cm²
Shaft Diameter:
38 mm
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
