Schneider Electric SH32052P12F1200 servo motor SH3 205 64,9Nm,key,multi,brake,str.conn,IP65/IP67,3.8k RPM
SKU:
SH32052P12F1200
UPC:
MPN:
SH32052P12F1200
Condition:
New
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Shaft Diameter:
38 mm
Continuous Stall Torque:
64.9 N.m 115...480 V three phase
Maximum Radial Force Fr:
4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
Rotor Inertia:
145 kg.cm²
Maximum Current Irms:
96.8 A
Sustainable Offer Status:
Green Premium product
Peak Stall Torque:
220 N.m 115...480 V three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Width:
10 mm
Number Of Mounting Holes:
4
Length:
454.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Continuous Power:
7900 W
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Weight:
53.6 kg
Maximum Axial Force Fa:
740 N
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Encoder Type:
absolute multiturn SinCos Hiperface
Type Of Cooling:
natural convection
Maximum Mechanical Speed:
3800 rpm
Shaft Length:
80 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Support:
international standard flange
Stator Resistance:
0.3 Ohm
Nominal Torque:
61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
Mounting Holes Diameter:
14 mm
Device Short Name:
SH3.....P
Continuous Stall Current:
25.7 A
Back Emf Constant:
161 V/krpm 20°C
Holding Brake:
with
Range Compatibility:
PacDrive 3
Motor Flange Size:
205 mm
Shaft End:
parallel key
Warranty:
18 months
Torque Constant:
2.58 N.m/A 120°C
Nominal Output Power:
3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
Product Or Component Type:
servo motor
Number Of Motor Poles:
5
Country of Origin:
United States
[Us] Rated Supply Voltage:
115...480 V
Environmental Disclosure:
ENVPEP111049EN
Stator Inductance:
8.2 mH
Circle Diameter Of The Mounting Holes:
215 mm
Electrical Connection:
straight connector
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5 || IP67 housing: conforming to EN/IEC 60034-5