Schneider Electric SH32053P02F2200 servo motor SH3 205 94,4Nm,nokey,multi,brake,90°conn.IP65/IP67,3.8k RPM
SKU:
SH32053P02F2200
UPC:
MPN:
SH32053P02F2200
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Centring Collar Diameter:
180 mm
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Nominal Output Power:
4450 W 115 V single phase || 7790 W 230 V single phase || 10620 W 400 V three phase || 10100 W 480 V three phase
Centring Collar Depth:
4 mm
Maximum Current Irms:
136.1 A
Sustainable Offer Status:
Green Premium product
Maximum Axial Force Fa:
740 N
Mounting Support:
international standard flange
Encoder Type:
absolute multiturn SinCos Hiperface
Speed Feedback Resolution:
128 periods
Country of Origin:
United States
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
Motor Flange Size:
205 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Resistance:
0.2 Ohm
Rotor Inertia:
206 kg.cm²
Mercury Free:
Yes
Continuous Stall Torque:
94.4 N.m 115...480 V three phase
Product Or Component Type:
servo motor
Maximum Mechanical Speed:
3800 rpm
Pvc Free:
Yes
Back Emf Constant:
172 V/krpm 20°C
Mounting Holes Diameter:
14 mm
[Us] Rated Supply Voltage:
115...480 V
Electrical Connection:
rotatable right angled connector
Nominal Torque:
84.9 N.m 115 V single phase || 74.4 N.m 230 V single phase || 50.7 N.m 400 V three phase || 40.2 N.m 480 V three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Range Compatibility:
PacDrive 3
Circle Diameter Of The Mounting Holes:
215 mm
China Rohs Regulation:
X
Net Weight:
70.6 kg
Device Short Name:
SH3.....P
Weight:
70.6 kg
Holding Torque:
80 N.m
Environmental Disclosure:
ENVPEP111049EN
Shaft Length:
80 mm
Shaft End:
smooth shaft
Continuous Stall Current:
33.2 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.