Schneider Electric SSL1D03BDPR Solid state relay pre assembled, Harmony, 3.5A, DC switching, spring sockets, input 16…30V DC, output 1...24V DC _
Schneider Electric
$40.12
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric SSL1D03BDPR Solid state relay pre assembled, Harmony, 3.5A, DC switching, spring sockets, input 16…30V DC, output 1...24V DC _
This slim interface solid state relay belongs to the Schneider Electric Harmony solid state relays range. This is a pre-assembled relay mounted on a socket that has a built-in reverse polarity protection circuit and a LED indicator. This is a 3.5A DC switching slim relay with 16Vdc to 30Vdc input and 1Vdc to 24Vdc output. This pre-assembled relay is a ready-to-go package saving assembly time. This 6mm relay has an IP67 water resistant encapsulation and a IP20 socket protection. The relay socket connection is by spring terminal type with a lever for locking or releasing the relay. This SSL weighs 0.033Kg. It is the ideal solution for packaging, HVAC, injection molding, textile machines, medical equipment, and heating control applications. It conforms to international standard and certifications like IEC, UL, CSA, CE, ROHS, GOST, EN, and REACH. It is sold in lots of 30. Thiss is a complete range of control input and load output configurations for both AC and DC switching applications. The pre-assembled range in SSL brings you easier selection, time-saving in installation and robustness.
- Depth:
- 79.5 mm
- Ambient Air Temperature For Storage:
- -20-85°C
- Net Weight:
- 0.0285 kg
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Phase:
- 1 phase
- Standards:
- IEC 60950-1 || IEC 61000 || IEC 62314 || IEC 61984 || EN 61984
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Environmental Disclosure:
- ENVPEP1405004EN
- Response Time:
- 0.25 ms (turn-on) || 0.12 ms (turn-off)
- Device Short Name:
- SSL
- Overvoltage Category:
- III
- Maximum Voltage Drop:
- <0.5 V on-state
- Product Or Component Type:
- pre-assembled plug-in relay with socket
- Maximum Leakage Current:
- 0.001 mA off-state
- Maximum Switching Voltage:
- 5 V DC turn-off
- Minimum Switching Voltage:
- 16 V DC turn-on
- Connections - Terminals:
- flexible cable with cable end, 0.2...1.5 mm² AWG 24...AWG 16) || solid cable with cable end, 0.2...1.5 mm² AWG 24...AWG 16)
- Mounting Support:
- spring socket
- Input Impedance:
- 2.67 kOhm
- Range Of Product:
- Harmony Solid State Relays
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Output Switching Mode:
- DC switching
- Ip Degree Of Protection:
- IP20
- Solid State Output Type:
- Mosfet output || DC switching
- China Rohs Regulation:
- X
- Dielectric Strength:
- 2500 V for input/output
- Capacitance Unbalance:
- 1.5 pF input/output
- Sustainable Offer Status:
- Green Premium product
- [Uc] Control Circuit Voltage:
- 16...30 V DC
- Output Voltage:
- 1...24 V DC
- Surge Current:
- 9 A 10 ms
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Ambient Air Temperature For Operation:
- -20-70°C
- Product Certifications:
- UL || CSA || CE || UL 508 || CSA22.2 No. 14-10 || GOST
- Rohs Exemption Information:
- Yes
- Tightening Torque:
- 10...40 N.m
- Marking:
- cURus || CSA || CE || EAC
- Absolute Maximum Voltage:
- 30 V DC
- Line Rated Current:
- 3.5 A
- Pollution Degree:
- 2
- Circularity Profile:
- ENVEOLI1405004EN
- Load Current:
- 0.001-3.5 A
- Flame Retardance:
- V0 conforming to UL 94
- Warranty:
- 18 Months
- Reach Free Of Svhc:
- Yes
- Country of Origin:
- Indonesia
