Schneider Electric

Schneider Electric SSP03EMA24SD Surge protection device, Surgelogic, EMA, 240kA, 240/120VAC delta, 3 phase, 4 wire, NEMA 4X, disconnect switch

(No reviews yet) Write a Review
SKU:
SSP03EMA24SD
MPN:
SSP03EMA24SD
Condition:
New
Device Mounting:
surface
Short-Circuit Protection:
200 kA
Number Of Poles:
3
Mercury Free:
Yes
Product Or Component Type:
surge protection device
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Depth:
238.8 mm
Standards:
CSA C22.2 No 8 || UL 1449:ed. 4 || UL 1283:ed. 5
Enclosure Material:
Stainless Steel
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Range Of Product:
Surgelogic
Line Rated Current:
150 A
Surge Current:
240 kA
Eu Rohs Directive:
Compliant with Exemptions
Local Signaling:
status LED green per phase normal operation || status LED red per phase fault
Rohs Exemption Information:
Yes
Cable Length:
483 mm
Provided Equipment:
alarm enable/disable switch || surge counter || switch-disconnector with integrated switch for off/on/automatic || dry contacts
Nominal Discharge Current:
20 kA
[Ue] Rated Operational Voltage:
240/120 V delta AC
Device Short Name:
EMA
Ambient Air Temperature For Operation:
65-65°C
Length:
483 mm
Wiring Configuration:
4-wire
Phase:
3 phase
[Uc] Maximum Continuous Operating Voltage:
150 V
Nema Degree Of Protection:
NEMA 4X
Connections - Terminals:
lugs AWG 10...AWG 3/0 copper 4 N.m
$8,946.00

Description

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 240,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at distribution and branch panel applications. Using a mechanical system to electrically isolate the entire surge suppressor, servicing of units components is simplified. Being modular in design, this unit is able to achieve superior surge suppression at every level of the electrical distribution system. This unit provides surge suppression from service entrance panels to point-of-use equipment. While adhering to NEMA 4X standards, this 3 phase 4-wire surge protector implements the high-leg delta system.
View AllClose

Related Products

Related Products