
Schneider Electric SSP1A450M7 single phase relay, Harmony Solid State Relays, 50A, panel mount, zero voltage switching, input 90 to 280V AC, output 48 to 660V AC
Schneider Electric
$47.92
This panel mount static relay accepts wiring with either bare cable, crimped cable ends, fork lugs or ring lugs Its rated current is 50 A, is controlled with a 90 to 280 V DC circuit, has a rated load voltage of 48 to 660 V DC output. It also has a test button for easy debugging, testing and commissioning It mounts on metallic panel surface, with an excellent thermal dissipation capability thanks to its factory-installed thermal pad, or on DIN rails with an accessory heatsink It has a visual indicator showing the status of its input and a alarm output enabling a quick response to unexpected events
- Ambient Air Temperature For Operation:
- -40-80°C
- Rohs Exemption Information:
- Yes
- Protection Device Type:
- type 1 - 40 A miniature circuit breaker (MCB) B || type 2 - 32 A miniature circuit breaker (MCB) B
- Dielectric Strength:
- 4 kV AC for input/output || 4 kV AC for input or output to case
- Ip Degree Of Protection:
- IP20
- Line Rated Current:
- 50 A
- Standards:
- IEC 60950-1 || CSA C22.2 No 14-13 || IEC 62314 || UL 508
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Maximum Voltage Drop:
- <1.15 V on-state
- Minimum Switching Voltage:
- 90 V AC turn-on
- Local Signaling:
- LED, green input
- Absolute Maximum Voltage:
- 1200 V
- Dv/Dt:
- 500 V/µs off-state at maximum voltage
- Load Current:
- 0.15-50 A
- Tightening Torque:
- 1.5...1.7 N.m for input || 2...2.2 N.m for output
- Mounting Support:
- panel
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Marking:
- EAC || CE || UL || CSA
- Range Of Product:
- Harmony Solid State Relays
- Product Certifications:
- EAC || CE || CSA || UL
- [Uc] Control Circuit Voltage:
- 90...280 V AC
- Maximum Leakage Current:
- 1 mA off-state
- Maximum Switching Voltage:
- 10 V AC turn-off
- Ambient Air Temperature For Storage:
- -40-125°C
- Surge Current:
- 625 A 16.6 ms
- Output Switching Mode:
- zero voltage switching
- Insulation Resistance:
- 1000 MOhm at 500 V DC
- Environmental Disclosure:
- ENVPEP1505006EN
- Maximum Horse Power Rating:
- 0.75 hp 120 V AC || 2 hp 240 V AC || 5 hp 480 V AC
- Circularity Profile:
- ENVEOLI1505006EN
- Connections - Terminals:
- screw terminals 0.2...3.3 mm², AWG 24...AWG 12) with cable end input || screw terminals 0.5...5.26 mm², AWG 20...AWG 10) with cable end output || screw terminals 0.2...3.3 mm², AWG 24...AWG 12) without cable end input || screw terminals 0.5...8.26
- Output Voltage:
- 48...660 V AC
- Safety Reliability Data:
- B10d = 1731395 || MTTFd = 1875.9 years
- Product Or Component Type:
- panel mount relay
- Weight:
- 89.2 g
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV output to case || 6 kV input to output
- Pollution Degree:
- 2
- Device Presentation:
- complete product
- Cos Phi:
- 0.5-0.5 (with maximum load)
- Net Weight:
- 89.2 g
- Device Short Name:
- SSP1
- Mercury Free:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Input Current Limits:
- 5-10 mA
- Overvoltage Category:
- III
- Maximum I²T For Fusing:
- 1770 A².s for 10 ms at 50 Hz || 1629 A².s for 8.33 ms at 60 Hz
- China Rohs Regulation:
- X
- Solid State Output Type:
- SCR output || zero voltage switching
- Country of Origin:
- Mexico