Schneider Electric STBDAO5260K standard digital output kit STB - 115 V AC - 2 O
SKU:
STBDAO5260K
UPC:
MPN:
STBDAO5260K
Condition:
New
Product Certifications:
CSA || UL || FM Class 1 Division 2
Standards:
IEC 61131-2
Discrete Output Logic:
positive or negative
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Rohs Exemption Information:
Yes
Insulation Between Channels:
1780 V for 1 minute
Product Or Component Type:
standard digital output kit
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Reset:
manual or automatic reset COM fault
Supply:
power distribution module
Hot Swapping Fallback:
yes for standard NIMs
Discrete Output Current:
1000 mA 60°C || 2000 mA 30°C
Response Time:
10 ms off-to-on || 10 ms on-to-off
Discrete Output Voltage:
115 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
0.067 kg
Maximum Leakage Current:
2 mA at state 0 132 V
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Operating Altitude:
<= 6561.68 ft (2000 m)
Overvoltage Category:
II
Relative Humidity:
95-95 % 60-60°C without condensation
Ambient Air Temperature For Storage:
-40...185°F without derating
Weight:
0.067 kg
Cold Swapping:
yes
Surge Current:
20 A 40 ms || 30 A 20 ms
Country of Origin:
France
Range Of Product:
Modicon STB distributed I/O solution
Insulation Between Channels And Logic Bus:
1780 V for 1 minute
Height:
18.4 mm
Discrete Output Number:
2
Ambient Air Temperature For Operation:
0-60°C without derating)
Marking:
CE
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Output Voltage:
74....132 V AC
Mercury Free:
Yes
Depth:
70 mm
Discrete Output Voltage Type:
AC
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT2) || 1 LED (Red) module error (ERR)
Absolute Maximum Voltage:
132 V
Kit Composition:
STBXBA2000 base || STBDAO5260 module || STBXTS1100, 5-terminal screw type connector || STBXTS2110, 5-terminal spring clamp connector
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Pollution Degree:
2 IEC 60664-1
Discrete Output Type:
triac
Protection Type:
output surge protection external fuse 5 A
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Product Compatibility:
power distribution module STBPDT2100/2105 || I/O base STBXBA2000
This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This safety discrete output module provides 6 outputs, 24V DC, transistor 0,2A. There is an...
TeSys D control relay, 5 contacts (5NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 115V 50/60Hz AC control circuit, connection by spring terminals. For high operating...
Optional Input Output module compatible with EasyLogic PM2130, PM2230 devices that provides additional digital inputs and configurable outputs. This digital module provides 2 digital status inputs...
