Schneider Electric

Schneider Electric TPRSS009 SIL motor starter, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp, DOL type

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric TPRSS009 SIL motor starter, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp, DOL type

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

TPRSS009

UPC:

MPN:

TPRSS009

Condition:

New

Range:

TeSys

Connections - Terminals:

screw-clamp terminals 1 1-4 mm² AWG 16...AWG 12)rigid || screw-clamp terminals 2 1-4 mm² AWG 16...AWG 12)rigid || screw-clamp terminals 1 1.5-4 mm² AWG 16...AWG 12)flexible without cable end || screw-clamp terminals 2 1.5-4 mm² AWG 16...AWG 12

Operating Time:

< 100 ms closing || < 30 ms opening

Protective Treatment:

TC

Metering Type:

time device ON || time device switch ON || number of faults || number of switching cycles || number of device power cycles || average current Iavg || average voltage Vavg || max current Imax || max voltage Vmax || active and reactive power with volta

Fire Resistance:

960°C UL 94 || 850°C IEC 60695-2-1 || 650°C IEC 60695-2-12

Ambient Air Temperature For Operation:

-10-50°C without derating || 50-60°C with current derating

Device Short Name:

TPRSS

Product Compatibility:

TPRBC bus coupler || TPRVM voltage interface module || TPRSM SIL interface module

Mounting Mode:

horizontal and vertical 35 mm symmetrical DIN rail)

Power Dissipation In W:

3.5 W at Ie AC-3

Product Name:

TeSys island

Width:

45 mm

Utilisation Category:

AC-1 || AC-2 || AC-3 || AC-4 || AC-3e

Vibration Resistance:

1.5 mm peak to peak 3-13 Hz) IEC 60068-2-6 || 1 gn 13-200 Hz) IEC 60068-2-6

Electromagnetic Compatibility:

electrostatic discharge immunity test, level 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || radiated RF field immunity test, level 3, 10 V/m, conforming to EN/IEC 61000-4-3 || fast transient immunity test, level 4, 4 kV, conforming to E

Device Presentation:

direct starter connected to an automation controller through a bus coupler || operational only when connected to a bus coupler

Irms Rated Making Capacity:

250 A at 440 V conforming to IEC 60947

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Product Certifications:

EAC || UL || CSA || CCC

Ambient Air Temperature For Storage:

-25-70°C

Current Consumption:

160 mA contactor sealed || 160 mA contactor closing

Power Dissipation Per Pole:

0.2 W AC-3 - Ith 9 A || 0.56 W AC-1 - Ith 15 A

Relative Humidity:

5-95 %

Poles Description:

3P 3 NO

[Uimp] Rated Impulse Withstand Voltage:

6 kV IEC 60947-1

Function Available:

upstream voltage presence detection || electrical line and load protection || power and energy monitoring when connected with TPRVM voltage module || safe stop function available when connected with a TPRSM module

Safety Function:

safe stop: category 0 conforming to IEC 60204-1 when associated with a TPRSM module || safe stop: category 1 conforming to IEC 60204-1 when associated with a TPRSM module

Local Signaling:

for DS (device status) 1 LED (green/red) || for LS (load status) 1 LED (green/red)

[Ui] Rated Insulation Voltage:

690 V IEC 60947-4-1 || 600 V UL 60947-4-1 || 600 V CSA C22.2 No 60947-4-1

Pollution Degree:

2

[Ie] Rated Operational Current:

9 A (at <50°C) at <= 440 V AC-3 || 15 A (at <50°C) at <= 440 V AC-1

[Ue] Rated Operational Voltage:

<= 690 V AC 47...63 Hz

Motor Starter Type:

direct on line

Protection Type:

thermal overload protection || motor overheat || overcurrent || undercurrent || jam || long start || stall || rapid cycle lockout || rapid restart lockout || phase sequence || phase loss || phase reversal || phase unbalance || ground current

Average Impedance:

2.5 mOhm - Ith 15 A 50 Hz

Depth:

115 mm

Country of Origin:

Mexico

Standards:

EN/IEC 60947-1 || EN/IEC 60947-4-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1

Ip Degree Of Protection:

IP20

[Ith] Conventional Free Air Thermal Current:

15 A (at 50°C)

Rohs Exemption Information:

Yes

Reset:

remotely or automatically

Product Or Component Type:

SIL motor starter

[Icw] Rated Short-Time Withstand Current:

210 A 40°C - 1 s || 105 A 40°C - 10 s || 61 A 40°C - 1 min || 30 A 40°C - 10 min

Weight:

0.656 kg

Maximum Operating Rate:

3600 cyc/mn AC-3

Eu Rohs Directive:

Compliant with Exemptions