Schneider Electric

Schneider Electric TPRSS038 SIL motor starter, TeSys island, 40A at AC-1, 38A at AC-3, 18.5kW, 20hp, DOL type

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric TPRSS038 SIL motor starter, TeSys island, 40A at AC-1, 38A at AC-3, 18.5kW, 20hp, DOL type

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

TPRSS038

UPC:

MPN:

TPRSS038

Condition:

New

Electromagnetic Compatibility:

electrostatic discharge immunity test, level 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || radiated RF field immunity test, level 3, 10 V/m, conforming to EN/IEC 61000-4-3 || fast transient immunity test, level 4, 4 kV, conforming to E

[Uc] Control Circuit Voltage:

24 V DC supplied by the bus coupler

Maximum Operating Rate:

3600 cyc/mn AC-3

Sustainable Offer Status:

Green Premium product

Mounting Mode:

horizontal and vertical 35 mm symmetrical DIN rail)

Protection Type:

thermal overload protection || motor overheat || overcurrent || undercurrent || jam || long start || stall || rapid cycle lockout || rapid restart lockout || phase sequence || phase reversal || phase loss || phase unbalance || ground current

Rated Breaking Capacity:

550 A at 440 V conforming to IEC 60947

Motor Starter Type:

direct on line

[Ith] Conventional Free Air Thermal Current:

40 A (at 50°C)

Local Signaling:

for DS (device status) 1 LED (green/red) || for LS (load status) 1 LED (green/red)

Maximum Horse Power Rating:

2 hp at 120 V AC 60 Hz for 1 phase motors || 5 hp at 240 V AC 60 Hz for 1 phase motors || 10 hp at 208 V AC 60 Hz for 3 phase motors || 10 hp at 240 V AC 60 Hz for 3 phase motors || 20 hp at 480 V AC 60 Hz for 3 phase motors || 25 hp at 600 V AC 60 H

[Ie] Rated Operational Current:

38 A (at <50°C) at <= 440 V AC-3 || 40 A (at <50°C) at <= 440 V AC-1

Product Name:

TeSys island

Irms Rated Making Capacity:

550 A at 440 V conforming to IEC 60947

Electrical Durability:

1.4 Mcycles 38 A AC-3 440 V || 2 Mcycles 40 A AC-1 440 V

Device Presentation:

direct starter connected to an automation controller through a bus coupler || operational only when connected to a bus coupler

Shock Resistance:

15 gn 11 ms) IEC 60068-2-27

Depth:

115 mm

[Uimp] Rated Impulse Withstand Voltage:

6 kV IEC 60947-1

Warranty:

18 months

Standards:

EN/IEC 60947-1 || EN/IEC 60947-4-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1

Reset:

remotely or automatically

Mechanical Durability:

30 Mcycles

Metering Type:

time device ON || time device switch ON || number of faults || number of switching cycles || number of device power cycles || average current Iavg || average voltage Vavg || max current Imax || max voltage Vmax || active and reactive power with volta

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

[Ue] Rated Operational Voltage:

<= 480 V AC 47...63 Hz for overvoltage cat. III || <= 690 V AC 47...63 Hz for overvoltage cat. II

Mercury Free:

Yes

Net Weight:

0.718 kg

Halogen Content Performance:

Halogen free plastic parts product

Relative Humidity:

5-95 %

Fire Resistance:

960°C UL 94 || 850°C IEC 60695-2-1 || 650°C IEC 60695-2-12

Vibration Resistance:

1.5 mm peak to peak 3-13 Hz) IEC 60068-2-6 || 1 gn 13-200 Hz) IEC 60068-2-6

Motor Power Kw:

9 kW at 230 V 50 Hz (AC-3) || 18.5 kW at 380...415 V 50 Hz (AC-3) || 18.5 kW at 440 V 50 Hz (AC-3) || 18.5 kW at 500 V 50 Hz (AC-3) || 18.5 kW at 690 V 50 Hz (AC-3)

Range:

TeSys

Function Available:

upstream voltage presence detection || electrical line and load protection || power and energy monitoring when connected with TPRVM voltage module || safe stop function available when connected with a TPRSM module

Safety Function:

safe stop: category 0 conforming to IEC 60204-1 when associated with a TPRSM module || safe stop: category 1 conforming to IEC 60204-1 when associated with a TPRSM module

Safety Level:

SIL 2 conforming to IEC 61508 in single channel system architecture || SILCL 2 conforming to IEC 62061 in single channel system architecture || PL = d category 2 conforming to ISO 13849-1 in single channel system architecture

Thermal Protection Adjustment Range:

0.76-38 A

Ip Degree Of Protection:

IP20

Protective Treatment:

TC

Safety Reliability Level:

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Product Certifications:

CSA || EAC || UL || CCC

Power Dissipation Per Pole:

2.9 W AC-3 - Ith 38 A || 3.2 W AC-1 - Ith 40 A

Circularity Profile:

ENVEOLI1904009EN

Ambient Air Temperature For Storage:

-25-70°C

Connections - Terminals:

screw-clamp terminals 1 1.5-10 mm² AWG 16...AWG 8)rigid || screw-clamp terminals 2 1.5-10 mm² AWG 16...AWG 8)rigid || screw-clamp terminals 1 2.5-10 mm² AWG 14...AWG 8)flexible without cable end || screw-clamp terminals 2 2.5-10 mm² AWG 14...A

[Icw] Rated Short-Time Withstand Current:

430 A 40°C - 1 s || 310 A 40°C - 10 s || 150 A 40°C - 1 min || 60 A 40°C - 10 min

Product Compatibility:

TPRBC bus coupler || TPRVM voltage interface module || TPRSM SIL interface module