Schneider Electric

Schneider Electric TPRST025 Motor starter, TeSys island, 30A at AC-1, 25A at AC-3, 11kW, 15hp, DOL type

(No reviews yet) Write a Review
SKU:
TPRST025
MPN:
TPRST025
Condition:
New
Halogen Content Performance:
Halogen free plastic parts product
Maximum Operating Rate:
3600 cyc/mn AC-3
[Ith] Conventional Free Air Thermal Current:
30 A (at 50°C)
Motor Starter Type:
direct on line
Motor Power Kw:
5.5 kW at 230 V 50 Hz (AC-3) || 11 kW at 380...415 V 50 Hz (AC-3) || 11 kW at 440 V 50 Hz (AC-3) || 15 kW at 500 V 50 Hz (AC-3) || 15 kW at 690 V 50 Hz (AC-3)
Environmental Disclosure:
ENVPEP1904009EN
Connections - Terminals:
screw-clamp terminals 1 1.5-10 mm² AWG 16...AWG 8)rigid || screw-clamp terminals 2 1.5-10 mm² AWG 16...AWG 8)rigid || screw-clamp terminals 1 2.5-10 mm² AWG 14...AWG 8)flexible without cable end || screw-clamp terminals 2 2.5-10 mm² AWG 14...A
Width:
45 mm
Overvoltage Category:
III for Ue <= 480 V || II for Ue <= 690 V
[Uc] Control Circuit Voltage:
24 V DC supplied by the bus coupler
Power Dissipation Per Pole:
1.25 W AC-3 - Ith 25 A || 1.8 W AC-1 - Ith 30 A
Reset:
remotely or automatically
Average Impedance:
2 mOhm - Ith 30 A 50 Hz
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947-1
Circularity Profile:
ENVEOLI1904009EN
Ip Degree Of Protection:
IP20
Operating Altitude:
0...6561.68 ft (0...2000 m) without derating
Depth:
115 mm
Device Presentation:
direct starter connected to an automation controller through a bus coupler || operational only when connected to a bus coupler
Rated Breaking Capacity:
450 A at 440 V conforming to IEC 60947
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
[Ie] Rated Operational Current:
25 A (at <50°C) at <= 440 V AC-3 || 30 A (at <50°C) at <= 440 V AC-1
Range:
TeSys
Tightening Torque:
2.5-2.5 N.m flat Ø 6 mm || 2.5-2.5 N.m Philips No 3
Device Short Name:
TPRST
[Icw] Rated Short-Time Withstand Current:
380 A 40°C - 1 s || 240 A 40°C - 10 s || 120 A 40°C - 1 min || 50 A 40°C - 10 min
Product Compatibility:
TPRBC bus coupler || TPRVM voltage interface module
Ambient Air Temperature For Storage:
-25-70°C
Weight:
0.718 kg
Protection Type:
thermal overload protection || motor overheat || overcurrent || undercurrent || jam || long start || stall || rapid cycle lockout || rapid restart lockout || phase sequence || phase reversal || phase loss || phase unbalance || ground current
Relative Humidity:
5-95 %
Product Or Component Type:
motor starter
[Ue] Rated Operational Voltage:
<= 480 V AC 47...63 Hz for overvoltage cat. III || <= 690 V AC 47...63 Hz for overvoltage cat. II
Poles Description:
3P 3 NO
[Ui] Rated Insulation Voltage:
690 V IEC 60947-4-1 || 600 V UL 60947-4-1 || 600 V CSA C22.2 No 60947-4-1
Irms Rated Making Capacity:
450 A at 440 V conforming to IEC 60947
Eu Rohs Directive:
Compliant with Exemptions
Mounting Mode:
horizontal and vertical 35 mm symmetrical DIN rail)
Product Name:
TeSys island
Rohs Exemption Information:
Yes
Product Certifications:
CCC || UL || CSA || EAC
Pollution Degree:
2
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electromagnetic Compatibility:
electrostatic discharge immunity test, level 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || radiated RF field immunity test, level 3, 10 V/m, conforming to EN/IEC 61000-4-3 || fast transient immunity test, level 4, 4 kV, conforming to E
Fire Resistance:
960°C UL 94 || 850°C IEC 60695-2-1 || 650°C IEC 60695-2-12
Ambient Air Temperature For Operation:
-10-50°C without derating || 50-60°C with current derating
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
$285.00

Description

TeSys island direct starter, 3 poles, 25A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 25A and motors up to 11kW@400V / 15hp@480V. It provides motor protection functions including thermal overload (setting 0.5-25A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).
View AllClose