Schneider Electric

Schneider Electric TVS4IMA12O OEM assembler kit, Surgelogic, 120kA, 480Y/277VAC, 3 phase, 4 wire, SPD type 2

(No reviews yet) Write a Review
SKU:
TVS4IMA12O
MPN:
TVS4IMA12O
Condition:
New
Range Of Product:
Surgelogic
Warranty:
18 months
Depth:
92.7 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Short-Circuit Protection:
200 kA
Nominal Discharge Current:
20 kA
Rohs Exemption Information:
Yes
Device Short Name:
IMA
Standards:
UL 1449:ed. 4 || CSA C22.2 No 8:1986 || UL 96A:ed. 12 || UL 1283 || IEC 61643-1
Nema Degree Of Protection:
NEMA 2
[Uc] Maximum Continuous Operating Voltage:
320 V
Country of Origin:
Indonesia
Provided Equipment:
alarm enable/disable switch || diagnostic display || backplane || cables
Phase:
3 phase
Product Or Component Type:
surge protection device
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Connections - Terminals:
lugs AWG 12...AWG 2 aluminium/copper 4 N.m
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Surge Current:
120 kA per phase
Eu Rohs Directive:
Compliant with Exemptions
Wiring Configuration:
4-wire
[Ue] Rated Operational Voltage:
480Y/277 V AC
$4,526.00

Description

Surgelogic OEM/assembler kits allow manufacturers to add industry leading surge suppression directly to customized equipment. Manufacturers benefit from shorter wire lengths that optimize the clamping voltage of the SPD. Products come with a backplane mounted SPD, mounting hardware and diagnostic display with 36 inch cables. Audible alarm, silence switch, remote monitoring contacts, and surge counter are standard. This Surgelogic OEM assembler kit a 480Y/277 VAC, 3 phase, 4 wire and ground Wye system. Can be used on 4 wire or 3 wire grounded wye systems with or without neutral. The peak surge current rating per phase 120 kA. This unit has a NEMA 2 unit is 155.7 mm tall, 250.4 mm wide and 92.7 mm deep. US and Canadian UL component recognized to UL 1449 and UL 1283 standards. Complies with requirements of NEC Article 285 and CSA 22.2 No. 8 M1986 as appropriate. Complies with UL 96A 12th edition master label requirements for lightning protection systems.
View AllClose

Related Products

Related Products