Schneider Electric

Schneider Electric UTRS101B Individual meter socket, ringless socket, no bypass, 4 jaws no release, OH, UG, 125 A, up to 600 VAC single phase 3W

(No reviews yet) Write a Review
SKU:
UTRS101B
MPN:
UTRS101B
Condition:
New
Product Certifications:
UL Listed
Eu Rohs Directive:
Under investigation
Product Or Component Type:
Meter Socket
Hub Type:
A ACP closing plate
Electrical Connection:
lugs slotted
Device Mounting:
surface
[Ue] Rated Operational Voltage:
600 V AC
Country of Origin:
United States
Enclosure Material:
steel
Service Feed Location:
OH
Wiring Configuration:
3-wire
Meter Socket Type:
ringless
Meter Socket Rated Current:
125 A
Warranty:
18 months
Number Of Jaws:
4 without jaw release
Awg Gauge:
AWG 8...AWG 2/0 1 aluminium/copper)line || AWG 14...AWG 2 1 aluminium/copper)service ground
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel (Metallic), which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For m
Phase:
1 phase
Nema Degree Of Protection:
NEMA 3R
Bypass Type:
no bypass
Box Number:
1R
Depth:
3.50 in
$123.00

Description

Individual Meter Sockets are available for single or three phase with a 600 VAC maximum. These individual meter sockets can be with and without horn or lever bypass. The sockets have a 10 kA short circuit current rating as standard but could have a higher rating with utility approval. Units are supplied with a bonded neutral. Units are supplied with a hub opening in top end wall which requires the use of a bolt on hub or a closing plate. This ringless meter socket has four jaws with no bypass and without jaw release. This meter socket is for single phase 3 wire systems up to 600 VAC. This meter socket has a 125 A rating. This unit can be for a feed from an overhead or underground service. This unit has a NEMA 3R surface mounting enclosure that is 10.88 inches tall, 8.00 inches wide and 3.50 inches deep. The main lugs, the load lugs and the neutral lug will accept one 8 AWG to 2/0 AWG copper or aluminum wire. The ground will accept 14 AWG to 2 AWG copper or aluminum wire. This individual meter socket is UL Listed.
View AllClose

Related Products

Related Products