Schneider Electric

Schneider Electric XPSMCMDO0004S 4 Digital output expansion modules with screw term

(No reviews yet) Write a Review
SKU:
XPSMCMDO0004S
MPN:
XPSMCMDO0004S
Condition:
New
Discrete Output Voltage:
24 V DC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reach Free Of Svhc:
Yes
Depth:
22.5 mm
Net Weight:
0.25 kg
Discrete Output Type:
PNP
Ip Degree Of Protection:
IP20 enclosure)
Power Consumption In W:
3 W
Group Of Channels:
4 single or 2 dual channel load 400mA/output
Relative Humidity:
10-95 %
Range Of Product:
Preventa Safety automation
Load Type:
resistive load
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Cable Cross Section:
0.2-1.5 mm² - AWG 24...AWG 16 flexible without cable end || 0.2-2.5 mm² - AWG 24...AWG 14 flexible with cable end, without bezel || 0.25-1 mm² - AWG 23...AWG 18 flexible with cable end, with bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with c
Electrical Connection:
screw terminal
Connections - Terminals:
2 captive screw clamp terminals, removable terminal block || 1 captive screw clamp terminals, removable terminal block
Weight:
0.25 kg
Country of Origin:
Italy
Integrated Connection Type:
backplane expansion bus
Function Of Module:
monitoring safety actuators discrete output
Safety Level:
can reach category 4 ISO 13849-1 || can reach PL = e ISO 13849-1 || can reach SIL 3 IEC 61508 || SILCL 3 IEC 62061
Pollution Degree:
2
Standards:
IEC 61800-5-1 || ISO 13849-1 || IEC 61508 || IEC 62061
Service Life:
20 year(s)
Number Of Outputs:
4 safety outputs OSSD safety outputs OSSD
Ambient Air Temperature For Storage:
-20-85°C
Ambient Air Temperature For Operation:
-10-55°C
Local Signaling:
1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 4 LEDs green/red OUT output status || 4 LEDs yellow RST restart signal
Overvoltage Category:
II
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Device Short Name:
XPSMCM
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Product Certifications:
TÃœV || RCM || cULus
Safety Reliability Data:
DC > 99 % || MTTFd = 238 years high || PFHd = 1.12E-8 1/h
Discrete Output Current:
400 mA || 100 mA
Shock Resistance:
10 gn 16 ms) 1000 shocks on each axis IEC 61496-1
China Rohs Regulation:
X
[Uimp] Rated Impulse Withstand Voltage:
4 kV IEC 61800-5-1
Number Of Terminal Blocks:
6
Product Or Component Type:
safe output expansion module
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
omega 35 mm DIN rail EN 50022
Number Of Inputs:
4 digital external device monitoring
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Mercury Free:
Yes
Rohs Exemption Information:
Yes
$445.94

Description

This Modicon MCM safe output expansion module has 4 single channel OSSD with 400mA output current, 4 status outputs SIL 1/PL c and is fitted with captive screw clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with screw clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.14kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÃœV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. This safe I/O module can only be configured with XPSMCMC10804 or XPSMCMC10804G safety controlles CPU. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose

Related Products

Related Products