Schneider Electric

Schneider Electric XPSMCMDO0004SG expansion module, Modicon MCM, 4 DO, spring

(No reviews yet) Write a Review
SKU:
XPSMCMDO0004SG
MPN:
XPSMCMDO0004SG
Condition:
New
Relative Humidity:
10-95 %
Ip Degree Of Protection:
IP20 enclosure)
Net Weight:
0.25 kg
Function Of Module:
monitoring safety actuators discrete output
Group Of Channels:
4 single or 2 dual channel load 400mA/output
Discrete Input Voltage:
24 V DC
Output Load:
60 Ohm
Power Consumption In W:
3 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
China Rohs Regulation:
X
Power Dissipation In W:
3 W
Device Short Name:
XPSMCM
Ambient Air Temperature For Operation:
-10-55°C
Safety Level:
can reach category 4 ISO 13849-1 || can reach PL = e ISO 13849-1 || can reach SIL 3 IEC 61508 || SILCL 3 IEC 62061
Number Of Inputs:
4 digital external device monitoring
Standards:
IEC 61508 || IEC 61800-5-1 || ISO 13849-1 || IEC 62061
Reach Free Of Svhc:
Yes
Country of Origin:
Italy
Discrete Input Type:
isolated
Safety Reliability Data:
DC > 99 % || MTTFd = 238 years high || PFHd = 1.12E-8 1/h
Range Of Product:
Preventa Safety automation
Discrete Output Current:
400 mA || 100 mA
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Connections - Terminals:
1 spring clamp terminals, removable terminal block || 2 spring clamp terminals, removable terminal block
Overvoltage Category:
II
Local Signaling:
1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 4 LEDs green/red OUT output status || 4 LEDs yellow RST restart signal
[Uimp] Rated Impulse Withstand Voltage:
4 kV IEC 61800-5-1
Cable Cross Section:
0.2-2.5 mm² - AWG 24...AWG 14 flexible without cable end || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, without bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, with bezel || 0.2-2.5 mm² - AWG 24...AWG 14 solid with ca
Pollution Degree:
2
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Service Life:
20 year(s)
Ambient Air Temperature For Storage:
-20-85°C
Discrete Output Type:
PNP
Weight:
0.25 kg
Rohs Exemption Information:
Yes
Mounting Support:
omega 35 mm DIN rail EN 50022
Mercury Free:
Yes
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Number Of Terminal Blocks:
6
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Number Of Outputs:
4 safety outputs OSSD safety outputs OSSD
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Depth:
22.5 mm
Integrated Connection Type:
backplane expansion bus
Load Type:
resistive load
Electrical Connection:
spring terminal
$458.32

Description

This Modicon MCM safe output expansion module has 4 single channel OSSD with 400mA output current, 4 status outputs SIL 1/PL c and is fitted with captive spring clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with spring clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.14kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÃœV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. This safe I/O module can only be configured with XPSMCMC10804 or XPSMCMC10804G safety controlles CPU. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose