Schneider Electric

Schneider Electric XPSMCMDO0008C1 8 digital output PL c, SIL1 expansion modules with screw term

(No reviews yet) Write a Review
SKU:
XPSMCMDO0008C1
MPN:
XPSMCMDO0008C1
Condition:
New
Integrated Connection Type:
backplane expansion bus
Pollution Degree:
2
Height:
99 mm
Number Of Outputs:
8 configurable diagnostic connection
Reach Free Of Svhc:
Yes
Weight:
0.25 kg
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Device Short Name:
XPSMCM
Ip Degree Of Protection:
IP20 enclosure)
Relative Humidity:
10-95 %
Quality Labels:
CE
Country of Origin:
Italy
Safety Reliability Data:
DC > 60 % || MTTFd = 985 years high || PFHd = 4.44E-9 1/h
Output Load:
60 Ohm
Discrete Input Type:
isolated
Rohs Exemption Information:
Yes
Discrete Output Voltage:
24 V DC
Range Of Product:
Preventa Safety automation
Cable Cross Section:
0.2-1.5 mm² - AWG 24...AWG 16 flexible without cable end || 0.2-2.5 mm² - AWG 24...AWG 14 flexible with cable end, without bezel || 0.25-1 mm² - AWG 23...AWG 18 flexible with cable end, with bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with c
Net Weight:
0.25 kg
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Group Of Channels:
8 single channel
Connections - Terminals:
2 captive screw clamp terminals, removable terminal block
Product Certifications:
TÃœV || RCM || cULus
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Power Dissipation In W:
3 W
Number Of Terminal Blocks:
6
Product Or Component Type:
safe output expansion module
Discrete Output Type:
DC
Load Type:
resistive load
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Function Of Module:
monitoring safety actuators discrete output
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Standards:
IEC 61800-5-1 || ISO 13849-1 || IEC 61508 || IEC 62061
Power Consumption In W:
3 W
Mounting Support:
omega 35 mm DIN rail EN 50022
Ambient Air Temperature For Operation:
-10-55°C
Discrete Output Current:
100 mA
[Uimp] Rated Impulse Withstand Voltage:
4 kV IEC 61800-5-1
Mercury Free:
Yes
Depth:
22.5 mm
Local Signaling:
1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 8 LEDs green/red OUT output status
Shock Resistance:
10 gn 16 ms) 1000 shocks on each axis IEC 61496-1
Overvoltage Category:
II
Discrete Input Voltage:
24 V DC
Service Life:
20 year(s)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$371.61

Description

This Modicon MCM safe output expansion module has 8 digital outputs SIL 1/PL c, and is fitted with captive screw clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with screw clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.13kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÃœV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose

Related Products

Related Products