Schneider Electric

Schneider Electric XPSMCMDO0008C1G expansion modules, Modicon MCM, 8 DO, PL c, SIL1, spring

(No reviews yet) Write a Review
SKU:
XPSMCMDO0008C1G
MPN:
XPSMCMDO0008C1G
Condition:
New
Safety Level:
can reach category 1 ISO 13849-1 || can reach PL = c ISO 13849-1 || can reach SIL 1 IEC 61508 || SILCL 1 IEC 62061
Discrete Input Voltage:
24 V DC
Product Certifications:
RCM || cULus || TÃœV
Reach Free Of Svhc:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Integrated Connection Type:
backplane expansion bus
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Ambient Air Temperature For Storage:
-20-85°C
Ip Degree Of Protection:
IP20 enclosure)
Quality Labels:
CE
Country of Origin:
Italy
Power Dissipation In W:
3 W
Number Of Terminal Blocks:
6
Depth:
22.5 mm
Net Weight:
0.25 kg
Cable Cross Section:
0.2-2.5 mm² - AWG 24...AWG 14 flexible without cable end || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, without bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, with bezel || 0.2-2.5 mm² - AWG 24...AWG 14 solid with ca
Mounting Support:
omega 35 mm DIN rail EN 50022
Standards:
IEC 61508 || IEC 61800-5-1 || ISO 13849-1 || IEC 62061
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Overvoltage Category:
II
Mercury Free:
Yes
Discrete Output Current:
100 mA
Local Signaling:
1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 8 LEDs green/red OUT output status
Connections - Terminals:
2 spring clamp terminals, removable terminal block
Ambient Air Temperature For Operation:
-10-55°C
Product Or Component Type:
safe output expansion module
Electromagnetic Compatibility:
electrostatic discharge immunity test - test level: 6 kV (on contact) conforming to IEC 61000-4-2 || electrostatic discharge immunity test - test level: 20 kV (on air) conforming to IEC 61000-4-2 || susceptibility to electromagnetic fields - test lev
[Uimp] Rated Impulse Withstand Voltage:
4 kV IEC 61800-5-1
Service Life:
20 year(s)
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Power Consumption In W:
3 W
Shock Resistance:
10 gn 16 ms) 1000 shocks on each axis IEC 61496-1
Output Load:
60 Ohm
Weight:
0.25 kg
Function Of Module:
monitoring safety actuators discrete output
Discrete Output Voltage:
24 V DC
Range Of Product:
Preventa Safety automation
China Rohs Regulation:
X
Pollution Degree:
2
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Electrical Connection:
spring terminal
Number Of Outputs:
8 configurable diagnostic connection
Load Type:
resistive load
Rohs Exemption Information:
Yes
Device Short Name:
XPSMCM
Group Of Channels:
8 single channel
$382.76

Description

This Modicon MCM safe output expansion module has 8 digital outputs SIL 1/PL c, and is fitted with captive spring clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with spring clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.13kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÃœV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose

Related Products

Related Products