Schneider Electric

Schneider Electric ZBRRD Programmable receiver - 2 relays - 24..240 V AC/DC - 2 pusbuttons - 6 LEDs

(No reviews yet) Write a Review
SKU:
ZBRRD
MPN:
ZBRRD
Condition:
New
Country of Origin:
Indonesia
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Housing Material:
self-extinguishing plastic
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Output Type:
2 relays
Vibration Resistance:
+/- 7.5 mm 5-14 Hz)IEC 60068-2-6 || 2 gn 8-150 Hz)IEC 60068-2-6
Maximum Switching Voltage:
250 V AC/DC
Control Circuit Frequency:
50...60 Hz +/- 10 %
Weight:
0.13 kg
Input Output Isolation:
galvanic isolation
Maximum Switching Current:
5 mA AC/DC
Status Led:
1 LED Green power ON || 2 LEDs Green relay ON || 2 LEDs Green function mode || 1 LED green and yellow reception signal
Function Of Module:
bi-stable || monostable
Short-Circuit Protection:
0.4 A fuse fast blow
Antenna Gain:
0 dBi
Nominal Output Current:
0.3 A 48 V DC IEC 60947-5-1 || 3 A 24 V DC UL 508 || 1.5 A 240 V AC IEC 60947-5-1 || 3 A 120 V AC IEC 60947-5-1 || 3 A 240 V AC UL 508 || 3 A 24 V DC CSA C22.2 No 14 || 3 A 240 V AC CSA C22.2 No 14
Device Short Name:
ZBRRD
Max Power Consumption In W:
1 mW
Output Contacts:
2 C/O
Response Time:
< 30 ms after transmitter clicks
Tightening Torque:
0.5-1 N.m IEC 60947-1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
X
Surge Withstand:
1 kV differential mode IEC 61000-4-5 || 2 kV common mode IEC 61000-4-5
[Uimp] Rated Impulse Withstand Voltage:
4 kV
Pollution Degree:
2 IEC 60664-1
Circularity Profile:
ENVEOLI1103010EN
Utilisation Category:
AC-15 : B300 IEC 60947-5-1 || DC-12 IEC 60947-5-1
Mechanical Durability:
1000000 cycles
Insulation Resistance:
> 500 MOhm 500 V DC NF C 20-030
Reset Time:
2 ms time delay
Depth:
75 mm
Sustainable Offer Status:
Green Premium product
Time Delay Range:
0.5 s - 15...15 %)
Rohs Exemption Information:
Yes
Ambient Air Temperature For Storage:
-40-70°C
Electrical Connection:
1 conductor cable 0.14-2.5 mm² - AWG 26...AWG 14 - solid - without cable end IEC 60947-1 || 2 conductors cable 0.14-1.5 mm² - AWG 26...AWG 16 - solid - without cable end IEC 60947-1 || 1 conductor cable 0.14-4 mm² - AWG 26...AWG 12 - flexible - wi
Environmental Disclosure:
ENVPEP101106EN
Modulation Technique:
O-QPSK
Relative Humidity:
90-90 % -20-55°C, without condensation ETSI EN 300 440-1
Rated Short-Duration Power Frequency Withstand Voltage:
1.5 kV 50 Hz IEC 60947-5-1
Mounting Support:
35 mm symmetrical DIN rail conforming to IEC 60715 || mounting plate
Operating Position:
any position without derating
Level Or Class:
5M00G7W
Warranty:
18 months
Maximum Power Consumption In W:
4 W AC/DC
$380.00

Description

This programmable receiver is part of the range Harmony XB5R plastic and XB4R metal wireless and batteryless pushbuttons. It features a configurable receiver equipped with 2 buttons (teach and parameter setting), 6 indicating LEDs (power ON, function modes, output status, signal strength). It is supplied set to monostable output function and can be configured to bistable and stop/start functions. Its supply voltage is 24V to 240V AC/DC.
View AllClose