Sensor Accessories

Accessories, Mounting Clamp, Fixing clamp with dead-stop, Plastic PA6

Accessories, Mounting Clamp, Fixing clamp M18 x 1, Plastic: PA6

Accessories, Mounting Clamp, Fixing clamp, Plastic: PBT

Accessories, Mounting Clamp, Fixing clamp, Plastic, PBTGF20V0, Included in delivery (2 M5 screws for base mounting)

Accessories, Mounting Bracket

Accessories, Mounting Bracket, For Dovetail Groove Cylinders, Mounting on dovetail groove cylinders, Groove width: 12.6ÿmm (e.g. Parker), Plastic: Polyphenylene sulfide (PPS)

Accessories, Mounting Bracket, For Dovetail Groove Cylinders, Mounting on dovetail groove cylinders, Groove width: 11.5ÿmm (e.g. Pneumax), Plastic: Polyphenylene sulfide (PPS)

Accessories, Mounting Bracket, For Dovetail Groove Cylinders, Mounting on dovetail groove cylinders, Groove width: 9.4ÿmm (e.g. Bosch, Joucomatic), Plastic: Polyphenylene sulfide (PPS)

Accessories, screw cap, Protective nut for flush mountable uprox+ sensors, For M18 x1 threaded barrel sensor, Stainless steel A2 1.4305 (AISI 303)

Accessories, Actuation kit (puck), End position damped, 6.2 mm stainless steel target to compensate larger tolerances (eg. caused by rubber seals), End position (open/closed) freely adjustable 360 °, in steps of 4°, Displays rotatable by 90 °, Scale...

Accessories, Actuation kit (puck), End position damped, 6.2 mm stainless steel target to compensate larger tolerances (e.g. caused by rubber seals), End position (open/closed) freely adjustable in a range of 360°, in steps of 4°, Displays rotatable by 90...

Accessories, Axial Joint for Guided Positioning Elements, Axial joint for M5 thread, Stainless steel, 1.4305

Accessories, Replacement screws for magnetic field sensors BIM-UNT

Turck Unt-Screw 1.5Mm Inbus (100 Pcs) Sensor Accessories 6901050 Turck ID=6901050

Accessories, Sliding Block, For Linear Position Sensors, Sliding block for linear position sensors Q25L, Material: galvanized steel, M4 female thread, Packaging unit: 10 pcs.

Accessories, captive safety clip, Captive safety clip for sensors with M8 x 1 connector and approval according to ATEX II 3 G or II 3 D, For zone 2 (gas) or zone 22 (dust), For coupling nuts with a width of up to 8 mm, Safety label with imprint nicht...

Mounting accessories

Accessories, Mounting Kit, Adapter for Tyco rotary actuator series PremiAir and Keystone, Height 20 mm / SW17, Standard 4 mm slot as per VDI/VDE 3845, 3-mm socket head screw (setscrew) for fixing the adapter in the drive, Plastic, POM

Mounting accessories

Turck Screw Inr (231 2009 03) Sensor Accessories 6900406 Turck ID=6900406