SMC 11-LEFS25A-150 | Clean Room Electric Actuator LEFS Series Ball Screw Drive 25mm Width 150mm Stroke Step/Servo Motor 24VDC
SMC
$1,075.00
The SMC 11-LEFS25A-150 is a clean room specification electric actuator from the LEFS series with ball screw drive and 25mm width body. Part number decoded: LEFS = LEFS series ball screw electric actuator, 25 = 25mm width, A = A-type motor (step motor servo 24VDC), 150 = 150mm stroke. The 25mm width steps up from the 16mm platform, providing increased payload capacity and moment load resistance for heavier tooling and end-effectors.
The A-type motor provides step motor servo operation at 24VDC, delivering precise multi-point positioning with programmable speed and acceleration profiles. The ball screw mechanism converts rotary motor motion into linear travel with minimal backlash and high efficiency. At 25mm width with 150mm stroke, this actuator handles medium-duty clean room positioning tasks including component transfer, inspection probe positioning, dispensing operations, and fixture adjustment where the LEFS16 lacks sufficient payload capacity.
The LEFS25A-150 is the short-stroke 25mm width option. For longer travel at the same width, the LEFS25A-600 extends to 600mm. For the B-type motor with different torque-speed characteristics, the LEFS25B variants provide an alternative drive configuration. For lighter loads at smaller size, the LEFS16AA provides the compact option. For higher capacity at the same stroke, the LEFS32A-200 steps up to 32mm width. Requires compatible SMC motor controller. Clean series (11-). RoHS compliant.
- Series:
- 11-LEFS (Clean Room)
- Actuator Type:
- Electric Slider Ball Screw
- Drive:
- Ball Screw Step/Servo Motor
- Voltage:
- 24VDC
- Width:
- 25mm
- Stroke:
- 150mm
- Motor Type:
- A (Step Motor Servo)
- Positioning:
- High Precision Multi-Point
- Clean Room Grade:
- Enhanced (11-)
- Certifications:
- RoHS
