SMC 11-LEFS25A-600 | Clean Room Electric Actuator LEFS Series Ball Screw Drive 25mm Width 600mm Stroke Step/Servo Motor 24VDC Long Travel
SMCThe SMC 11-LEFS25A-600 is a clean room specification electric actuator from the LEFS series with ball screw drive and 600mm long-travel stroke. Part number decoded: LEFS = LEFS series ball screw electric actuator, 25 = 25mm width, A = A-type step motor servo 24VDC, 600 = 600mm stroke. This is the longest stroke option in the LEFS25 range, providing extended reach for applications spanning over half a meter.
The 600mm stroke enables long-range precision positioning for clean room operations that require extended travel inter-station material transfer, large-substrate scanning, long-travel dispensing across wide panels, and multi-station pick-and-place systems. The ball screw maintains positioning accuracy and repeatability throughout the full 600mm travel without degradation. The A-type motor delivers consistent torque across the entire stroke range, though long-stroke applications should verify that critical speed (maximum RPM before screw whip) is not exceeded at the desired traverse speed.
The LEFS25A-600 is four times the stroke of the LEFS25A-150 in the same 25mm width. For intermediate strokes, the LEFS25 is available in standard increments. For even longer strokes at wider body sizes, the LEFS32A-800 provides 800mm travel with higher capacity. For B-type motor at long stroke, the LEFS25B series provides alternative motor configurations. For pneumatic long-stroke at 600mm without electric precision, the CG1 series round body cylinder offers two-position actuation. Requires compatible controller. Clean series (11-). RoHS compliant.
- Series:
- 11-LEFS (Clean Room)
- Actuator Type:
- Electric Slider Ball Screw
- Drive:
- Ball Screw Step/Servo Motor
- Voltage:
- 24VDC
- Width:
- 25mm
- Stroke:
- 600mm
- Motor Type:
- A (Step Motor Servo)
- Travel:
- Long (600mm)
- Positioning:
- High Precision Multi-Point
- Clean Room Grade:
- Enhanced (11-)
- Certifications:
- RoHS