SMC 11-LEFS32A-200 | Clean Room Electric Actuator LEFS Series Ball Screw Drive 32mm Width 200mm Stroke Step/Servo Motor 24VDC
SMC
$1,290.00
The SMC 11-LEFS32A-200 is a clean room specification electric actuator from the LEFS series with ball screw drive and 32mm width body. Part number decoded: LEFS = LEFS series ball screw electric actuator, 32 = 32mm width, A = A-type step motor servo 24VDC, 200 = 200mm stroke. The 32mm width is the second-largest in the LEFS range, providing substantial payload capacity and moment load resistance for medium to heavy clean room automation tasks.
The 32mm width provides significantly wider bearing separation than the 25mm and 16mm variants, increasing resistance to pitching, yawing, and rolling moments. This is critical when the slider carries heavy end-effectors, multi-tool fixtures, or workpieces with significant mass offset from the actuator centerline. The A-type step motor servo at 24VDC provides reliable multi-point positioning with the ball screw's inherent precision and mechanical advantage for consistent thrust force delivery.
The LEFS32A-200 is the base 32mm A-type configuration at 200mm stroke. For the same width with K option, the LEFS32A-200K-S1 adds enhanced features. For longer strokes, the LEFS32A-300 and LEFS32A-800 extend travel to 300mm and 800mm. For B-type motor alternatives, the LEFS32B series provides different torque-speed characteristics. For lighter loads at smaller size, the LEFS25A provides the 25mm width step-down. Requires compatible SMC motor controller. Clean series (11-). RoHS compliant.
- Series:
- 11-LEFS (Clean Room)
- Actuator Type:
- Electric Slider Ball Screw
- Drive:
- Ball Screw Step/Servo Motor
- Voltage:
- 24VDC
- Width:
- 32mm
- Stroke:
- 200mm
- Motor Type:
- A (Step Motor Servo)
- Positioning:
- High Precision Multi-Point
- Clean Room Grade:
- Enhanced (11-)
- Certifications:
- RoHS
