Terminal Blocks

Connecting adapter; 3-pole; Solder contact for coil wire; 0.2 to 3.7 mm; natural

Connecting adapter; 3-pole; IDC for coil wire; natural

Component terminal block; 3-conductor; with diode 1N5408; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray

2-conductor fuse terminal block; with pivoting fuse holder; for glass cartridge fuse 1/4" x 1 1/4"; with blown fuse indication by neon lamp; 230 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray

Terminal block for pluggable modules; 6-pole; with 4-conductor terminal blocks; with marker carrier; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray

Terminal block for pluggable modules; 2-conductor; 27 mm; Orange separator plate

Terminal block for pluggable modules; 4-conductor; 22 mm; Orange separator plate

Terminal block for pluggable modules; 4-pole; with 4-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray

Double-deck terminal block; Ground conductor/through terminal block; 1.5 mm²; PE/N; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm²; gray

3-conductor actuator supply terminal block; LED (yellow); for NPN-(low-side) switching actuators; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 2.5 mm²; CAGE CLAMP; 2,50 mm²; orange

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 1.5 mm²; CAGE CLAMP; 1,50 mm²; orange

2-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP; 1,50 mm²; blue

Mini-WSB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; white

Operating tool with partially insulated shaft; Blade (2.5 x 0.4) mm; short; angled; suitable for 279, 2020, 2000 and 2001 Series