Description

Compact Controller 100, 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485 2ETH SD

Our 750 Series I/O couplers, when used with a PLC, offer the flexibility and great performance required for both big and small applications. Our Compact Controller 100 was thoughtfully designed for machine builders, factory floor operations, and other digitalization projects. It is user-friendly and requires no maintenance.

You may benefit from a tiny controller, digital inputs, and analog outputs all in one with our Compact Controller 100! This system combines sophisticated programming with professional software development skills for contemporary control applications with CODESYS version 3 software, the sector's top platform.

Benefits of our Compact Controller 100

Input: 8 Digital, 2 Analog, 2 RTD, Outputs: 4 Digital, 2 Analog
Two configurable RJ45 ports with MicroSD card slots
Pluggable connectors via WAGO's PicoMAX Push-in CAGE CLAMP®
Expand the number and type of I/O using our 750 series couplers
Industrial protocols supported
Pair with 787-2850 Power Supply for compact footprint

See Additional Information Tab for Specs

Datasheet

Brochure

View AllClose

Additional Information

baud rate:	ETHERNET: 10/100 Mbit/s
baud rate communication fieldbus 1:	10/100 Mbit/s
communication:	Modbus (TCP, UDP) \|\| Modbus« RTU \|\| RS-485 serial interface
configuration options:	CODESYS V3.5 \|\| ETHERNET Settings \|\| Web-Based Management
conformity marking:	CE: UKCA
connection technology communication fieldbus:	Modbus TCP/UDP: 2 x RJ-45: RS-485 serial interface: 1 x Female connector, 4-pole: Push-in CAGE CLAMP«
connection technology field supply:	2 x Female connector, 10-pole: Push-in CAGE CLAMP«
connection technology system supply:	1 x Female connector, 2-pole: Push-in CAGE CLAMP«
controls:	Operating mode switch (RUN, STOP, RESET): reset button
country of origin sales organisation germany:	DE
cpu:	Cortex A7: 650 MHz
data memory:	128 MB
depth from upper edge of din rail:	55 mm / 2.165 inch
emc emission of interference:	Per EN 61000-6-3
emc immunity to interference:	Per EN 61000-6-2
ethernet protocols:	DHCP \|\| DNS \|\| NTP \|\| FTP \|\| FTPS \|\| SNMP \|\| HTTP \|\| HTTPS \|\| SSH
fine stranded conductor:	0.2 ª 1.5 mm / 24 ª 14 AWG
fire load:	0.000 MJ
height:	90 mm / 3.543 inch
housing material:	Polycarbonate: polyamide
indicators:	LED (SYS, RUN), red/green: Status of system: LED (USR) red/green: User programmable status (can be used via CODESYS library): LED (SD) orange: Status of SD: LED (LNK/ACT) green: Network connection via ports 1 ª 2: LED (DI1 ª 8) green: Status of
input characteristic:	Type 3 (per EN 61131-2)
internal memory flash:	4096 MB
isolation:	500 V (DC 1 min., between system and field level)
load impedance voltage output:	« 5 k
main memory ram:	512 MB
memory card slot:	Push-push mechanism
memory card type:	MicroSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
mounting position:	Any
mounting type:	DIN-35 rail
non volatile hardware memory:	128 kB
non volatile software memory:	128 kB
number of analog inputs:	2
number of analog outputs:	2
number of digital inputs:	8
number of digital outputs:	4
number of measurement inputs:	2
operating altitude:	0 ª 2000 m
operating system:	Real-time Linux (with RT-Preempt patch)
output current:	Short-circuit-protected
output current per channel:	DC 500 mA
pollution degree 5:	2 per IEC 61131-2
power consumption 5 v system supply:	2000 mA
program memory:	32 MB
programming environment:	CODESYS V3.5
programming languages per iec 61131 3:	Instruction List (IL) \|\| Ladder Diagram (LD) \|\| Function Block Diagram (FBD), Continuous Function Chart (CFC) \|\| Structured Text (ST) \|\| Sequential Function Chart (SFC)
protection class:	II
protection type:	IP20
relative humidity without condensation:	0.95
resolution of analog inputs:	16 bits
resolution of analog outputs:	12 bits
shock resistance:	15g per IEC 60068-2-27
signal type:	Voltage \|\| Resistance measurement
solid conductor:	0.2 ª 1.5 mm / 24 ª 14 AWG
strip length:	8 ª 9 mm / 0.31 ª 0.35 inch
supply voltage field:	24 VDC (-15 ª +20 %): via wiring interface (picoMAX« 3.5: Push-in CAGE CLAMP« connection)
supply voltage system:	24 VDC (-15 ª +20 %): via wiring interface (picoMAX« 3.5: Push-in CAGE CLAMP« connection)
surrounding air temperature operation:	-25 ª 60 C
surrounding air temperature storage:	-40 ª 85 C
temperature range:	-60 C ª 350 C, PT1000, Ni1000
transmission medium communication fieldbus:	ETHERNET: Twisted Pair S-UTP: 100 : Cat. 5: 100 m maximum cable length
vibration resistance:	1g per IEC 60068-2-6
visualization:	Web Visu
voltage signal type:	0 ª 10 VDC
weight:	348.000 g
width:	108 mm / 4.252 inch