Description
Description | Electronic circuit breaker EPSITRON ; 24 VDC; 2 x 6 A; active current limitation | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Remarks | Item description:
Nominal current: Max. 2 x 6 ADC (0.5, 1, 2, 3, 4, 6 A adjustable for each channel via selector switch) Switch-on behavior: Time-delayed channel switching (load-dependent, min. 50 ms / max. 5 s) Remote input: Reactivation of all tripped channels via 15 30 VDC pulse for min. 500 ms Switching on/off any number of channels via pulse sequence. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Item properties | Miscellaneous
|
Additional Information
active current limitation: |
Yes |
conformity marking: |
CE |
connection technology: |
Push-in CAGE CLAMP |
connection technology 2: |
CAGE CLAMP |
connection type 1: |
Input (+) |
connection type 2: |
Input (): output: signaling |
country of origin sales organisation germany: |
DE |
current limitation: |
1.7 x Io nom (typ.) |
default setting: |
DC 6 A: switched on |
depth from upper edge of din rail: |
115.5 mm / 4.547 inch |
efficiency typ: |
0.99 |
fine stranded conductor: |
0.5 10 mm / 20 8 AWG |
fine stranded conductor 2: |
0.08 2.5 mm / 28 12 AWG |
fire load: |
0.000 MJ |
height: |
90 mm / 3.543 inch |
input voltage range: |
DC 18 30 V |
internal fuse: |
T 15 A per channel |
isolation voltage connectors housing: |
DC 0.5 kV |
mounting type: |
DIN-35 rail |
mtbf: |
> 500,000 h (per IEC 61709) |
nominal input voltage ui nom: |
DC 24 V |
nominal output current io nom: |
2 x 0.5 / 1 / 2 / 3 / 4 / 6 A (Adjustable for each channel via selector switch) |
nominal output voltage uo nom: |
2 x DC 24 V |
operation status indicator: |
Green LED (channel OK) || Red LED (tripped channel) |
output voltage range: |
DC 18 30 V (Ue voltage drop) |
packaging type: |
Box |
parallel operation of single channels: |
Not permitted |
pollution degree: |
2 |
power loss pl: |
¤ 0.55 W (No load): ¤ 2.5 W (2 x 6 A) |
protection class: |
III |
protection type: |
IP20 (per EN 60529) |
relative humidity: |
5 96 % (no condensation permissible) |
remote input: |
Reactivation of all tripped channels via 15 30 VDC pulse for min. 500 ms || Switching on/off any number of channels via pulse sequence |
resistance to reverse feed: |
¤ DC 35 V |
reverse voltage protection: |
No |
series operation: |
No |
signaling: |
2 x LED (green/red/orange) || 1 x Remote control input (S1) || 2 x Active signal output (S2: S3) |
solid conductor: |
0.5 10 mm / 20 8 AWG |
solid conductor 2: |
0.08 2.5 mm / 28 12 AWG |
standards specifications: |
EN 60950 || EN 61000-6-2 || EN 61000-6-3 || UL 508 || UL 2367 || DNV GL |
strip length: |
13 15 mm / 0.51 0.59 inch |
strip length 2: |
8 9 mm / 0.31 0.35 inch |
surrounding air temperature operation: |
-25 70 C |
surrounding air temperature storage: |
-25 85 C |
switch on behavior: |
Time-delayed channel switching (load-dependent, min. 50 ms / max. 5 s) |
switch on capacity: |
> 65000 F per channel |
total number of channels module: |
2 |
transient suppression primary: |
Suppressor diode (33 V) |
voltage drop: |
¤ 145 mV (Input (+)) |
wago connector: |
WAGO 831 Series |
wago connector 2: |
WAGO 721 Series |
weight: |
170.000 g |
width: |
45 mm / 1.772 inch |