null
Wago 787-622

Wago 787-622 Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 5 A output current; 2,50 mm

Wago
SKU:
787-622
$415.90
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 5 A output current; 2,50 mm

  • Primary switch mode power supply unit
  • Prepared for protection class I equipment
  • Parallel operation, series connection possible
  • Natural convection cooling when horizontally mounted
  • Enclosed for use in switchgear cabinets
  • Electrically isolated output voltage (SELV) acc. to EN 60950-1/UL 60950
Additional Information
conformity marking:
CE
connection technology:
CAGE CLAMP
connection type 1:
Input/output
control deviation:
¤ 2 %
country of origin sales organisation germany:
DE
current limitation:
1.1 x Io nom (typ.)
default setting:
DC 24 V
depth from upper edge of din rail:
120 mm / 4.724 inch
derating:
-3 %/K (> 50 C)
discharge current:
¤ 0.55 mA
efficiency typ:
0.9
fine stranded conductor:
0.08 2.5 mm / 28 12 AWG
fire load:
4.800 MJ
height from upper edge of din rail:
133 mm / 5.236 inch
input current ii:
¤ 0.85 A (230 VAC)
input voltage range:
AC 90 264 V: DC 130 300 V
inrush current:
¤ 30 A
internal fuse:
T 4 A / 250 VAC
isolation voltage pri gnd:
DC 2.2 kV
isolation voltage pri sec:
DC 4.242 kV
isolation voltage sec gnd:
DC 0.7 kV
mains failure hold up time:
20 ms (230 VAC)
mounting type:
DIN-35 rail
nominal input voltage ui nom:
1 x AC 100 240 V: DC 140 300 V
nominal mains frequency range:
50 60 Hz: 0 Hz
nominal output current io nom:
5 A (24 VDC)
nominal output voltage uo nom:
DC 24 V (SELV)
note conductor cross section:
12 AWG: THHN, THWN
open circuit proof:
Yes
operation status indicator:
Green LED (24 V OK)
output voltage range:
DC 22 28.8 V (adjustable)
overload behavior:
Constant current
overvoltage protection secondary:
Internal protective circuit || ¤ 40 VDC (in the event of a fault)
packaging type:
Box
parallel operation:
Yes
phases:
1
pollution degree:
2
power factor correction pfc:
Passive
power loss max pl max:
13 W (90 VAC / 24 VDC: 5 A)
power loss pl:
¤ 10 W (230 VAC: No load)
protection class:
I
protection type:
IP20 (per EN 60529)
recommended backup fusing:
Circuit breaker: C10 or B10
relative humidity:
30 85 % (no condensation permissible)
required backup fusing:
An external DC fuse is required for the DC input voltage.
residual ripple:
¤ 100 mV (Peak-to-peak)
resistance to reverse feed:
¤ DC 30 V
series operation:
Yes
short circuit protected:
Yes
solid conductor:
0.08 2.5 mm / 28 12 AWG
standards specifications:
EN 60950-1 || EN 61204-3 || UL 60950 || UL 508 || GL
strip length:
8 9 mm / 0.31 0.35 inch
surrounding air temperature operation:
-10 70 C
surrounding air temperature storage:
-25 85 C
transient suppression primary:
Varistor
wago connector:
WAGO 231 Series
weight:
790.000 g
width:
67 mm / 2.638 inch
Related Products