WAGO 852-102

(No reviews yet) Write a Review
SKU:
852-102
MPN:
852-102
Condition:
New
baud rate:
Copper cable: 10/100 Mbit/s
color:
Black
communication standards:
IEEE 802.3 10BASE-T || IEEE 802.3u 100BASE-TX || IEEE 802.3x Flow Control
configuration options:
DIP switch for signal contact
conformity marking:
CE
connection technology communication fieldbus:
Copper cable: 8 x RJ-45
connection technology supply:
1 x Built-in male connector: 231-436/001-000: included female connector (MCS Connectors): 231-106/026-000
controls:
12 x DIP switch: Alarm function power supplies and ports 1 8
country of origin sales organisation germany:
TW
depth:
120 mm / 4.724 inch
diagnostics:
Signal contact
emc emission of interference:
Per EN 61000-6-4
emc immunity to interference:
Per EN 61000-6-2
esd contact air discharge:
8 KV / 15 KV
fire load:
0.000 MJ
height:
162 mm / 6.378 inch
housing material:
Aluminum
indicators:
Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary): LED (ALM) red: Alarm: per port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 8
jumbo frame size:
1536 Byte
mac table size:
2000 addresses
mounting type:
DIN-35 rail
number of 100base tx ports:
8
packaging type:
Box
packet throughput:
148800 pkt/s
power consumption max:
5.28 W
power consumption typ 24 v:
4.56 W
protection type:
IP30
redundancy function:
Redundant DC power supply
relative humidity without condensation:
0.95
shock resistance:
Per IEC 60068-2-27
supply voltage:
9 48 VDC: Cable length:< 3 m
surrounding air temperature operation:
-40 70 C (UL max. +60 C)
surrounding air temperature storage:
-40 80 C
switching mode:
Storeandforward: non-blocking
transmission medium communication fieldbus:
Copper cable: Cat. 5 or higher, 100 m maximum cable length
vibration resistance:
Per IEC 60068-2-6
weight:
909.000 g
width:
50 mm / 1.969 inch
  • Wago 852-102
  • Wago 852-102
$373.20

Description

  • Redundant DC power supply
  • Large supply voltage range: 9 ... 48 V
  • DIP switches to set alarm functions
  • Full compliance with IEEE802.3, 802.3u stantards
  • Nonlocking, storendorward switching
  • Autonegotiation at all 10/100Base TX ports
  • Auto-MDI/MDIX (crossover) at all 10/100Base TX ports
View AllClose