WAGO 852-1106
- SKU:
- 852-1106
- Condition:
- New
- baud rate:
- Copper cable: 10/1000 Mbit/s
- color:
- Metallic black
- communication standards:
- IEEE 802.3 10BASE-T || IEEE 802.3u 100BASE-TX/FX || IEEE 802.3ab 1000BASE-T || IEEE 802.3x Flow Control || IEEE 802.3az Energy Efficient Ethernet || IEEE 802.1p Prioritization
- configuration options:
- DIP switch for signal contact
- conformity marking:
- CE
- connection technology communication fieldbus:
- Copper cable: 16 x RJ-45
- connection technology supply:
- 1 x Built-in male connector: 231-436/001-000: included female connector (MCS Connectors): 2231-106/026-000
- controls:
- 2 x DIP switch: Alarm function power supplies
- country of origin sales organisation germany:
- TW
- depth:
- 120 mm / 4.724 inch
- diagnostics:
- Signal contact
- emc emission of interference:
- Per EN 61000-6-4
- emc immunity to interference:
- Per EN 61000-6-2
- fire load:
- 0.234 MJ
- height:
- 162 mm / 6.378 inch
- housing material:
- Aluminum
- indicators:
- Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary): LED (ALM) red: Alarm: per port: LED (1000, LNK/ACT) green: Status 1000 Mbps, LNK/ACT ports 1 16
- jumbo frame size:
- 10000 Byte
- mac table size:
- 8000 addresses
- mounting type:
- DIN-35 rail
- number of 1000base t ports:
- 16
- packaging type:
- Box
- power consumption max:
- 12 W
- protection type:
- IP30
- redundancy function:
- Redundant DC power supply
- relative humidity without condensation:
- 0.95
- shock resistance:
- Per IEC 60068-2-27
- supply voltage:
- 12 60 VDC
- surrounding air temperature operation:
- -40 70 C
- surrounding air temperature storage:
- -40 80 C
- switching mode:
- Storeandforward: non-blocking
- transmission medium communication fieldbus:
- Copper cable: Cat. 5e or higher, 100 m maximum cable length
- vibration resistance:
- Per IEC 60068-2-6
- weight:
- 840.000 g
- width:
- 50 mm / 1.969 inch
Description
Industrial-Switch16Port Gb, metallic black
View AllClose
- Redundant DC power supply
- Wide supply voltage range: 12 60 VDC
- DIP switches to set alarm functions
- Full compliance with IEEE 802.3, 802.3u and 802.3ab standards
- Non-blocking, store-and-forward switching
- Auto-Negotiation on all 10/100/1000Base-T ports
- Auto-MDI/MDIX (crossover) at all 10/100/1000Base-T ports
- Integrated address look-up table, supports up to 8000 absolute MAC addresses
- Overvoltage protection
- Prioritization of Profinet Ethernet Frame (EtherType=0x8892) according to IEEE802.1p