Description
Industrial-ECO-Switch; 5-port 100Base-TX RemarksItem description: The 852-111 is a 5-port 10/100Base-TX industrial ETHERNET switch supporting Auto-Negotiation and Auto-MDI-/MDI-X detection for each port. Using the switch's 5 ports, several segments can be created to reduce the network load, while providing a dedicated bandwidth to each user node. The 852-111 switch is a cost-effect solution to keep up with the constant demands of IP-based, industrial communication needs. The switch is easy to configure and install and is best suited for small to medium-sized networks. Features: 5 ETHERNET ports, 10/100 Mbps autonegotiation Front-panel diagnostic LEDs Supports Auto-MDI/MDI-X functions Full/half-duplex transfer modes for each port Store-and-forward switching method Integrated address look-up table, supports 2000 absolute MAC addresses Overvoltage protection IEEE 802.3x flow control in full-duplex mode DIN-35 rail mounting LED: each device: 1 x Power (PWR), green; each port: 1 x Link/Activity (LNK/ACT), green; 1 x 10/100 Mbps, green Standards: IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX/FX; IEEE 802.3x Flow Control Item properties Miscellaneous NameValueUnit Color black Topology Star Supply voltage 18 V ... 30 V DC Ports 5 x 10/100Base-TX (RJ-45) Energy consumption max. [W] 3 W Fire load [MJ] 5.28 MJ Weight [g] 352 g Width 23.4 mm / 0.921 Inch Height from upper-edge of DIN-35 rail 73.8 mm / 2.906 Inch Depth 109.2 mm / 4.299 Inch Housing material Sheet steel Storage temperature -40 ... +80 Relative air humidity (no condensation) [%] 95 % Relative humidity 95 % non-condensing Type of mounting DIN-35 x 15 carrier rail Fixing DIN 35 rail
