- Web-based/SNMP management
- Redundant DC power supply
- Wide supply voltage range: 12 ... 60 VDC
- DIP switches to set alarm functions
- Full compliance with IEEE802.3, 802.3u, 802.3z, 802.3x, 802.3ad, 802.3ab, 802.1d, 802.1q, 802.1p, 802.1w, 802.1x standards
- Xpress Ring (redundant ring, recovery < 50 ms)
- Nonblocking, storeandforward switching, rapid spanning tree protocol (RSTP)
- Autonegotiation at all 10/100Base-TX ports
- Auto-MDI/MDIX (crossover) at all 10/100Base-TX ports
- VLAN (802.1q) VID
- IGMP snooping for multicast filtering
- Port configuration, status, statistics
- Port trunking
- SNMP v1/v2 and RMON
The WAGO 852 series is an industrial managed Ethernet switch featuring 11 ports, including 8 RJ45 ports (100BASE-TX), 2 SFP ports (100BASE-FX / 1000BASE-SX/LX), and 1 RS-232 port. It supports Ethernet/IP communication and operates on a supply voltage of 12-60Vdc. Designed for harsh environments, it is rated for temperatures ranging from -40°C to +70°C and can be mounted on a DIN-35 rail or wall. The switch also includes redundant DC power supplies and is housed in a compact 50mm wide IP30-rated enclosure.
- baud rate:
- Copper cable: 10/100 Mbit/s: Fiber optic:1000 Mbit/s
- color:
- Metallic black
- communication standards:
- IEEE 802.3 10BASE-T || IEEE 802.3u 100BASE-TX/FX || IEEE 802.3z 1000BASE-SX/LX || IEEE 802.3x Flow Control || IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) || IEEE 802.1Q VLAN Tagging || IEEE 802.1ab Link Layer Discovery Protocol (LLDP) || IEEE 802
- configuration options:
- DIP switch for signal contact || Command Line Interface || SNMPv1/v2c/v3
- conformity marking:
- CE
- connection technology communication fieldbus:
- Copper cable: 8 x RJ-45: Fiber optic: 2 x SFP: LC fiber-optic connector
- connection technology supply:
- 1 x Built-in male connector: 231-436/001-000: included female connector (MCS Connectors): 2231-106/026-000
- controls:
- 14 x DIP switch: Alarm function power supplies and ports 1 10, 100/1000 Mbps fiber optic ports: 1 x Reset button: system restart
- country of origin sales organisation germany:
- TW
- depth:
- 120 mm / 4.724 inch
- diagnostics:
- Signal contact, Modbus/TCP, port status, port statistics, port load, traffic monitor, SFP information, syslog, mail alarm, SNMP traps
- emc emission of interference:
- Per EN 61000-6-4
- emc immunity to interference:
- Per EN 61000-6-2
- esd contact air discharge:
- 8 KV / 15 KV
- fire load:
- 0.234 MJ
- height:
- 162 mm / 6.378 inch
- housing material:
- Aluminum
- indicators:
- Device: LED (PWR, RPS, POST) green: Power supply (primary), redundant power supply (secondary), POST function: LED (ALM) red: Alarm: LED (LASER ON) yellow, LED (LNK/ACT, 100) green, LED (OFFLINE) red: Status of fiber optic ports: per port: LED (100,
- jumbo frame size:
- 10000 Byte
- mac table size:
- 16000 addresses
- mounting type:
- DIN-35 rail
- number of 1000base sx lx ports:
- 2
- number of 100base tx ports:
- 8
- optical fiber type:
- Single-mode and multi-mode
- packaging type:
- Box
- power consumption max:
- 12 W
- protection type:
- IP30
- redundancy function:
- Redundant DC power supply: STP: RSTP: MSTP: Jet Ring < 300 ms: Xpress Ring < 20 ms: Dual Homing < 20 ms: Dual Ring: ERPSv2 < 50 ms: LCAP
- relative humidity without condensation:
- 0.95
- shock resistance:
- Per IEC 60068-2-27
- supply voltage:
- 12 60 VDC: Cable length:< 3 m
- surrounding air temperature operation:
- -40 70 C
- surrounding air temperature storage:
- -40 80 C
- switching mode:
- Storeandforward: non-blocking
- transmission medium communication fieldbus:
- Copper cable: Cat. 5e or higher, 100 m maximum cable length: Fiber optic: SX Multi-Mode, LX Single-Mode
- vibration resistance:
- Per IEC 60068-2-6
- vlan:
- Port-based and tag-based (4k VIDs)
- weight:
- 910.000 g
- width:
- 50 mm / 1.969 inch
