Description
Socket with miniature switching relay; 12 VDC; 17 mA; Relay with 1 changeover contact (1u); for normal switching power RemarksItem description: Short description: Relay modules with replaceable miniature switching relays for electrical isolation of sensor/actuator level and contol/PLC. WAGO relay and modules are supplied in 6 mm-wide housing and share a common profile. The modules feature a single, flexible in-line jumper system (e.g., for supply voltages), eliminating discrete wiring. The pluggable relays can be replaced quickly and easily when needed. An optional interface adapter plugs into the input or output side. This combines eight modules and connects them via flat cable. The switch status is indicated by an integrated yellow LED. The device can be labeled using the WAGO WMB Multi marking system. Note: Note: Inductive loads have to be attenuated by an appropriate protective circuit in order to protect relay coils and contacts. Item properties Miscellaneous NameValueUnit Total number of connection points 5 Total number of potentials 5 Color gray Conformity marking CE Pull-in time (typ.) [ms] 8 ms Drop-out time (typ.) [ms] 4 ms Mechanical life 5 x 106 switching operations Pollution degree 2 Rated voltage [V] 250 V Rated impulse voltage [kV] 4 kV Operating power < 300 mW / < 700 mW Input voltage range VN -15 % ... +20 % Max. switching voltage 250 VAC Max. switching power (resistive) 1,500 VA (AC); DC see load limit curve Recommended minimum load 10 VDC / 10 mA; 24 VDC / 1 mA Max. switching load with load/without load 6 min-1 / 180 min-1 Nominal operating mode continuous duty Dielectric strength, contact-coil (AC, 1 min) [kVrms 4 kVrms Dielectric strength open contact (AC, 1 min) [kVrms 1 kVrms Mechanical life at max. load (resistance) 5 x 104 switching operations Nominal input voltage UN 12 VDC Max. continuous current 6 A Max. make current 20 ms (AC) 20 A Electrical life 5 x 104 switching operations Connection technology Push-in CAGE CLAMP Type of wiring Front-entry wiring Contact material AgSnO2 Processing temperature -25 ... +50 Fire load [MJ] 0.481 MJ Weight [g] 30.26 g Width 6 mm / 0.236 Inch Height from upper-edge of DIN-35 rail 81 mm / 3.189 Inch Depth 94 mm / 3.701 Inch Storage temperature -40 +70 Type of mounting DIN-35 x 15 carrier rail
View AllClose