WAGO 859-734

(No reviews yet) Write a Review
SKU:
859-734
MPN:
859-734
Condition:
New
circuit type:
Mains circuits
color:
Light gray
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
56 mm / 2.205 inch
dielectric strength control load circuit ac 1 min:
3.51 kVrms
fine stranded conductor:
0.08 2.5 mm / 28 14 AWG
fire load:
0.313 MJ
height:
91 mm / 3.583 inch
input voltage range high level:
DC 19 28.8 V
input voltage range low level:
DC 0 5 V
insulation type between adjacent devices of the the same type:
Reinforced insulation (safe isolation)
insulation type control load circuit:
Reinforced insulation (safe isolation)
leakage current at rated voltage:
¤ 1 mA
limiting continuous current:
0.5 A
mounting type:
DIN-35 rail
nominal input current at un:
6 mA
nominal input voltage un:
DC 24 V
note:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
operating altitude max:
2000 m
output voltage range:
AC 24 260 V (50 60 Hz)
overvoltage category:
III
packaging type:
Box
peak output current:
30 A
pollution degree:
2
processing temperature:
-25 +50 C
rated voltage:
300 V
relative humidity:
5 95 % (no condensation permissible)
solid conductor:
0.08 2.5 mm / 28 14 AWG
standards specifications:
EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || UL 508
status indicator:
Red LED
strip length:
5 6 mm / 0.2 0.24 inch
surrounding air temperature operation at un:
-25 55 C
surrounding air temperature storage:
-40 70 C
switching current min:
10 mA
switching frequency:
50 Hz / 60 Hz
turn off time:
¤ 10 ms
turn on time:
¤ 10 ms
voltage drop at output max:
¤ AC 1.2 V
weight:
20.199 g
width:
6 mm / 0.236 inch
$68.70

Description

Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 24 … 260 VAC; Limiting continuous current: 0.5 A; 2-wire connection; zero-cross switching; Red status indicator; Module width: 6 mm; light gray
View AllClose