The Baumer CFDK 25G1125/KS35LN1 11076113 is a flush-mounted, contactless sensor with a nominal sensing distance of 2 mm. It features a red LED output indicator and operates without sensitivity adjustment or detection of non-conductive media. This sensor is capable of fill level detection through containers but does not support liquids in direct contact or object detection in bulk goods. It has a voltage supply range of 10 to 30 VDC, a maximum current consumption of 15 mA, and an output function of active high with a push-pull output circuit. The output current is 100 mA with a voltage drop of less than 3 VDC and a switching frequency of 35 Hz. It includes short circuit and reverse polarity protection. The sensor is housed in a rectangular PA 12 casing, measuring 25 mm in width and 52.4 mm in length with a depth of 6 mm, and is connected via a flylead connector M8, 200 mm in length. It operates within a temperature range of -25 to +75 °C and is rated IP 65 for protection against dust and water ingress.
- Nominal sensing distance Sn:
- 2 mm
- Mounting type:
- Flush
- GND electrode:
- No
- Temperature drift:
- ± 15 %
- Sensitivity adjustment:
- No
- Output indicator:
- LED red
- Measurement type:
- Contactless
- Detection of non-conductive media:
- No
- Fill level detection through container:
- Yes
- Liquids in direct contact:
- No
- Object detection / bulk goods:
- NoVoltage supply range +Vs=10 30 VDC
- Current consumption max. (no load):
- 15 mA
- Output function:
- Active high
- Output circuit:
- Push-pull
- Output current:
- 100 mA
- Voltage drop Vd:
- <3 VDC
- Switching frequency:
- 35 Hz
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Design:
- Rectangular
- Housing material:
- PA 12
- Dimension:
- 25 mm
- Housing length:
- 52.4 mm
- Depth:
- 6 mm
- Connection types:
- Flylead connector M8, L=200 mm
- Operating temperature:
- -25 +75 °C
- Protection class:
- IP 65
- Datasheet:
- View
