Baumer FPDM 12P3401/S35A 10234200 is a retro-reflective sensor equipped with a pulsed red LED light source and a polarization filter. It has an actual range of 5 m and a nominal range of 5.2 m. Features include a flashing light indicator for alignment or soiled lens detection, and a yellow LED light indicator. This model does not allow for sensitivity adjustment. It operates with a wavelength of 660 nm and includes suppression of reciprocal influence. The response and release time is less than 1 ms. It requires a voltage supply range of 10 to 30 VDC, with a typical current consumption of 25 mA and a maximum of 35 mA. The voltage drop is less than 1.8 VDC. The output function is an alarm output in dark conditions, using a PNP output circuit with a maximum output current of 100 mA. It includes short circuit and reverse polarity protection. The sensor's dimensions are 12.4 mm in width/diameter, and 35 mm in both height and depth, with a rectangular, die-cast zinc housing and a PMMA front optics. It connects via an M8 4-pin connector and operates within a temperature range of -25 to +65 °C. The sensor is rated IP 67 for protection against dust and water ingress.
- Type:
- Retro-reflective sensor
- Light source:
- Pulsed red LED
- Actual range Sb:
- 5 m
- Nominal range Sn:
- 5.2 m
- Polarization filter:
- Yes
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED yellow
- Sensitivity adjustment:
- No
- Wave length:
- 660 nm
- Suppression of reciprocal influence:
- Yes
- Response time / release time:
- < 1 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 35 mA
- Current consumption typ.:
- 25 mA
- Voltage drop Vd:
- <1.8 VDC
- Output function:
- Alarm output dark
- Output circuit:
- PNP
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 12.4 mm
- Height / length:
- 35 mm
- Depth:
- 35 mm
- Design:
- Rectangular
- Housing material:
- Die-cast zinc
- Front (optics):
- PMMA
- Connection types:
- Connector M8 4 pin
- Operating temperature:
- -25 +65 °C
- Protection class:
- IP 67
- Datasheet:
- View
