Baumer IR30.D24S-N60.UA1Z.7BO 11179025 is a non-flush mounting inductive sensor with a measuring distance of 0 to 24 mm and a high resolution of less than 0.005 mm (static) and less than 0.01 mm (dynamic). It features a repeat accuracy of 0.02 mm and a linearity error ranging from ±800 µm to ±3000 µm. The sensor has a quick response time of less than 2 ms and operates on a voltage supply range of 12 to 36 VDC with a maximum current consumption of 10 mA. It outputs an analog signal (0 to 10 VDC) and supports a load resistance of over 4000 Ohm. Equipped with short circuit and reverse polarity protection, the sensor is housed in a cylindrical, nickel-plated brass body with a PBT sensing face. It connects via an M12 connector and can withstand operating temperatures from -25 to +75 °C. The sensor is IP67 rated, ensuring protection against dust and water ingress.
- Mounting type:
- Non-flush
- Measuring distance Sd:
- 0 24 mm
- Resolution:
- < 0.005 mm (stat.) < 0.01 mm (dynam.)
- Repeat accuracy:
- 0.02 mm
- Linearity error:
- ± 800 µm (S = 6 ... 18 mm) ± 3000 µm (S = 0 ... 24 mm)
- Temperature drift:
- ± 8 % (Full Scale)
- Response time (factory characteristic):
- < 2 ms
- Voltage supply range +Vs:
- 12 36 VDC
- Current consumption max. (no load):
- 10 mA
- Output circuit:
- Analog 0 ... 10 VDC
- Load resistance:
- > 4000 Ohm
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Design:
- Cylindrical threaded
- Material (sensing face):
- PBT
- Housing material:
- Brass nickel plated
- Dimension:
- 30 mm
- Housing length:
- 60 mm
- Connection types:
- Connector M12
- Tightening torque max.:
- 100 Nm
- Operating temperature:
- -25 +75 °C
- Protection class:
- IP 67
- Datasheet:
- View
- Operating Manual:
- View
