The Baumer MY-COM E75P80/L 10211843 is a high-precision sensor with a repeat accuracy of 0.001 mm and an activating force of 75 cN. It features a mechanical pre-run and overrun of - / 0.8 to 1.5 mm approximately, and is designed for contact with medium. Suitable for both frontal and lateral approaches, this sensor includes a red LED output indicator. It operates on a voltage supply range of 5 to 36 VDC, with a maximum load current of 50 mA at 24 VDC. The output circuit is a PNP make function (NO), and it requires a minimum load resistance of 480 Ohm. Constructed with a hardened steel activating pin and a brass nickel-plated housing, it measures 6 mm in diameter and 47 mm in housing length. The sensor is cylindrical threaded and comes with an 80 cm cable connection. It operates within a temperature range of -20 to +75 °C and has a protection class of IP 50. For more details, refer to the datasheet [here](https://www.baumer.com/medias/__secure__/My_Com_E75_P80_L_web_EN.pdf?mediaPK=8799749242910).
- Repeat accuracy:
- 0.001 mm
- Activating force:
- 75 cN
- Mech. pre-run / overrun:
- - / 0,8 ... 1,5 mm approx.
- Measurement type:
- Contact with medium
- Direction of approach:
- Frontal and lateral approach
- Output indicator:
- LED red
- Voltage supply range +Vs:
- 5 36 VDC
- Load current max. at 24 VDC:
- 50 mA
- Output circuit:
- PNP make function (NO)
- Load resistance min.:
- 480 Ohm
- Activating pin:
- Hardened steel
- Housing material:
- Brass nickel plated
- Dimension:
- 6 mm
- Design:
- Cylindrical threaded
- Housing length:
- 47 mm
- Connection types:
- Cable, 80 cm
- Operating temperature:
- -20 +75 °C
- Protection class:
- IP 50
- Datasheet:
- View
