The Baumer O200.EL-GW2I.72NV/A014_FREC 11229194 is a through beam sensor receiver designed for precision detection with a nominal range of 6 meters and an actual range of 5 meters. It features a dual-channel IO-Link interface and utilizes a pulsed red laser diode light source. This sensor can recognize objects as small as 3 mm, and even 0.5 mm with an aperture. It includes a flashing output indicator for alignment or soiled lens detection, LED indicators for power status and output, and allows sensitivity adjustments via IO-Link. The sensor supports suppression of reciprocal influence, has a response time of less than 0.1 ms, and jitter less than 0.03 ms. It operates on a voltage supply range of 10 to 30 VDC, with a typical current consumption of 10 mA at 24 VDC. The output function can operate in light or dark conditions, and it features a push-pull output circuit with a maximum output current of 50 mA. It includes short circuit and reverse polarity protection, is housed in a plastic body with PMMA optics, and is mechanically mounted in a smooth stainless steel sleeve. The sensor is IP67 rated for protection against dust and water ingress, operates within a temperature range of -25 to +50 °C, and connects via a 200 mm long M8 4-pin flylead connector.
- Type:
- Through beam sensor
- Version:
- IO-Link dual channel
- Emitter / receiver:
- Receiver
- Light source:
- Use with pulsed red laser diode
- Actual range Sb:
- 5 m
- Nominal range Sn:
- 6 m
- Smallest object recognizable typ.:
- 3 mm (0,5 mm with aperture)
- Alignment / soiled lens indicator:
- Flashing output indicator
- Output indicator:
- LED yellow
- Power on indication:
- LED green
- Sensitivity adjustment:
- IO-Link
- Suppression of reciprocal influence:
- Yes
- Response time / release time:
- < 0.1 ms < 0.12 ms
- Jitter:
- < 0.03 ms < 0.05 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 20 mA (@ 10 VDC)
- Current consumption typ.:
- 10 mA (@ 24 VDC)
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light / dark operate
- Output circuit:
- Push-pull
- Output current:
- 50 mA, sum of all outputs
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 8 mm
- Height / length:
- 25.1 mm
- Depth:
- 14.1 mm
- Design:
- Rectangular
- Mechanical mounting:
- Sleeve smooth (stainless steel)
- Housing material:
- Plastic (ASA, PMMA)
- Front (optics):
- PMMA
- Connection types:
- Flylead connector M8 4 pin, L=200 mm
- Cable characteristics:
- PVC / PVC 4 x 0.08 mm²
- Operating temperature:
- -25 +50 °C
- Protection class:
- IP 67
- Datasheet:
- View
- Operating Manual:
- View
