Baumer OPDM 12P5103/S35A 10137861 is a retro-reflective laser sensor featuring single lens optics and a pulsed red laser diode. It offers an actual range of 7 m and a nominal range of 8 m, with repeat accuracy of 0.1 mm at laser focus. Equipped with a polarization filter, this sensor includes a flashing light indicator for alignment or soiled lens detection, and LED indicators for power status and light operation. It does not require sensitivity adjustment. The sensor operates with a parallel beam at a wavelength of 650 nm and responds in less than 0.1 ms. It supports a voltage supply range of 10 to 30 VDC, with typical current consumption of 40 mA and a maximum of 50 mA. Features include light/dark operate output function, PNP output circuit, and an output current of 100 mA. It also has short circuit and reverse polarity protection. The sensor's compact, rectangular design measures 12.4 mm in width, 35 mm in height and depth, and is made from die-cast zinc with a glass front. It connects via an M8 4-pin connector and operates between -10 to +50 °C. The sensor is IP 67 rated for protection against dust and immersion.
- Type:
- Retro-reflective laser sensor
- Version:
- Single lens optics
- Light source:
- Pulsed red laser diode
- Actual range Sb:
- 7 m
- Nominal range Sn:
- 8 m
- Repeat accuracy:
- 0.1 mm at laser focus
- Polarization filter:
- Yes
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED yellow
- Power on indication:
- LED green
- Sensitivity adjustment:
- No
- Laser class:
- 2
- Distance to focus:
- Parallel beam
- Wave length:
- 650 nm
- Response time / release time:
- < 0.1 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 50 mA
- Current consumption typ.:
- 40 mA
- Voltage drop Vd:
- <1.8 VDC
- Output function:
- Light / dark operate
- Output circuit:
- PNP
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 12.4 mm
- Height / length:
- 35 mm
- Depth:
- 35 mm
- Design:
- Rectangular
- Housing material:
- Die-cast zinc
- Front (optics):
- Glass
- Connection types:
- Connector M8 4 pin
- Operating temperature:
- -10 +50 °C
- Protection class:
- IP 67
- Datasheet:
- View
